Users Manual

ManualsBrandseCare ManualsInstrumentsThermoPro: Remote Food Thermometer with Four Probes

ThermoPro

Remote Food Thermometer with Four Probes

Model No. TP-29B

Cook Like A Pro Every Time!

1. Introduction

Congratulations on your purchase of the Professional Remote Food Thermometer, a programmable radio frequency

food thermometer. You will now be able to remotely monitor the temperature of cooking food and the temperature

inside your grill, oven or smoker from anywhere in your home.

2. Components

1.x Receiver

1 x Transmitter

4 x Detachable, color coated stainless steel probes with steel mesh cable

4 x Plastic Winders

4 x AAA batteries.

2 x Clips

3. Receiver Features

1 Soft Rubber Sleeve 2Anti-slip 3Hanging Hole 4 Magnet 5 Flip-out Counter Top Stand 6 Battery Compartment 7

Tabletop Stand

· LCD (Liquid Crystal Display) – Displays all icons, temperature

· Low battery Indicator

· Remote range: 500FT（150m）

· IPX4 Waterproof(Protects from splashing water, but do not submerge in water)

Summary of content (8 pages)

PAGE 1
ThermoPro Remote Food Thermometer with Four Probes Model No. TP-29B Cook Like A Pro Every Time! 1. Introduction Congratulations on your purchase of the Professional Remote Food Thermometer, a programmable radio frequency food thermometer. You will now be able to remotely monitor the temperature of cooking food and the temperature inside your grill, oven or smoker from anywhere in your home. 2. Components 1.
PAGE 2
· · · · · · · Backlight Temperature Alarm Four color coated steel stainless probes Temperature range of probe: 14˚F to 572˚F (-10˚C to 300˚C) Tabletop, magnet and wall-mounted design Battery: 2*AAA batteries, 3.0V Timer 3.1 Buttons 1. : Tap to turn on/off the Receiver; Press and hold for 3 seconds to enter the Synchronize/Pair process. The synchronization signal will not stop blinking until the receiver and transmitter pair successfully. 2.
PAGE 3
4. LCD Screen 5. Transmitter Features 1 Soft Rubber Sleeve 2 Probe Sockets 3 Hanging 4 Flip-out Counter Top Stand 5 Battery Compartment 6 Tabletop Stand · LCD (Liquid Crystal Display) – Displays all icons, temperature · Low battery Indicator · Remote range: 500FT（150m） · IPX4 Waterproof(Protects from splashing water, but do not submerge in water) · Backlight · Tabletop, and wall-mounted design 5.1Buttons 1. 2. : Tap to turn on/off the Transmitter; Press and hold for 3 seconds to switch℉and ℃.
PAGE 4
6. Installing Batteries Open the battery compartment of the receiver and insert two “AAA” batteries with correct polarity. Open the battery compartment of the transmitter and insert two “AAA” batteries with correct polarity. 7. Turn On/Off Unit Press Press button on the receiver to turn on/off the receiver; button on the transmitter to turn on/off the transmitter. 8.
PAGE 5
2. Press the MEAT button until the LCD displays PROG (program). Press the ▲or ▼ buttons to raise or lower the set temperature. Press and hold the buttons to rapidly increase or decrease the temperature values. 3. Once the current temperature reaches the target temperature for Probe 1 or Probe 2, Probe3, Probe4, the receiver will sound an alarm. 4. Press any button to stop the alarm. 12.
PAGE 6
3. To pause the count up timer, press the S./S./ /CLEAR button. TIMER ▲ will become solid. 4. If you wish to clear the timer, press and hold the S./S./ simply press the S./S./ /CLEAR button. If you wish to continue the timer, /CLEAR button. Note: When the count up timer reaches 59 minutes and 59 seconds, it will automatically change to Hour: Minute display format. 14. Helpful Hints · If the receiver and / or the transmitter do not show the temperature, wait for the probe to reach room temperature.
PAGE 7
is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.
PAGE 8
FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.