User`s manual

EC-520 User’s Manual
- 3 -
Chapter 2 Installation
2.1 Unpacking
Check the pack list as following (See the Figure 2-1). It includes the following items:（1）Printer;（2）
Power cord;（3）Interface cable;（4）AC adapter;（5）57.5mm roll paper guide;
(6) 57.5mm Partition
board; (7) Printer Driver Disk (Including user's manual and windows driver); (8) Ribbon cassette
JMR113; (9) Facility User's Guide; (10) Warranty card.
If any item is missing or damaged, please contact your dealer.
Note: Interface cable is a optional part, it is selected or canceled as client’s required.
Note:
1. EC-520( without auto-cutter ) and EC-520C ( with auto-cutter ) are different in
appearance.
2. You should check the items according to the pack list, and they are subject to
change without additional notice.
2.2 Removing packing materials
① Unpack the packing box, take the printer out.
② Keep all the original packing materials, in order to transport the printer expediently in future.
2.3 Connecting Computer or Other Equipments
This printer is equipped with one data interface (parallel interface, serial interface or USB interface)
and one cash drawer interface. Make sure that you have selected the proper cable before
connecting.
Figure 2-1 Printer pack list
Printer
Warranty card
AC Adapter
Power Cord
57.5mm Partition Board
Interface Cable
Printer Driver Disk
(Including user's manual
and windows driver)
Ribbon Cassette
JMR113
Facility User's
Guide
57.5mm Roll
Paper Guide