User`s manual

EC-520 User’s Manual
- 13 -
NOTE：
Adjustment of column can have effect on printing quality. You must think carefully before
adjusting and must operate strictly according to instruction.
■ Hexadecimal Printing Mode
While pressing the FEED key and holding on, turn on the printer. The printer sounds four
beeps, and you should release the FEED key at the same time. The printer will enter the
Hexadecimal Printing Mode, as shown in the following figure.
3.5 Online-aptitude Parameter Settings
EC-520 supports the function of online-aptitude parameter settings, which can be set in the PC
with the driver installed in.
The concrete setting steps are shown as follows:
1. Make sure that the host and the printer are connected with a cable and both the host and the
printer is turned on, the printer should be online as well.
2. Click “Start”Æ”Settings”Æ”Printers”
3. Right click “EC PRINTER EC-520” in the “Printers”, select “Properties”.
4. Click “Device Property” in the property page.
Figure 3-7 Sample of Hexadecimal Printing Mode