User`s manual

EC-520 User’s Manual
- 12 -
■ Print-Pins Test
While pressing the FEED key and holding on, turn on the printer. The printer sounds
two beeps, and you should release the FEED key at the same time. The printer will print the
print-pins test. As shown in the following figure.
■ Mode of column setting
While pressing the FEED key and holding on, turn on the printer. The printer sounds three
beeps, and you should release the FEED key at the same time. The printer will print the degree
of column adjusting. As shown in the following figure. Each press will add 1 to the original value.
If you select BID 08, press FEED key for 8 times, and then press this key for a long time, it will
be saved after sounding two beeps, and the present selected value will be printed at the same
time. Turn off the printer; the new value will be active after the printer is restarted.
Figure 3-5 Sample of print-pins test
Figure 3-6 Sample of column setting
EC-520 9Pins Mini Printer V2.00
Have no Cut 200903110KY76F
print-pins TEST
1 2 3 4
5 6 7 8
EC-520C 9Pins Mini Printer V2.00
Have Cut 200903110KY76F
print-pins TEST
1 2 3 4
5 6 7 8