Specifications

104
DISCRETE 2 OF 5 (DTF)
Enable/Disable Discrete 2 of 5
To enable or disable Discrete 2 of 5, scan the appropriate bar code below.
Enable Discrete 2 of 5
< Disable
Discrete 2 of 5
>
Set Lengths for Discrete 2 of 5
The length of a code refers to the number of characters (i.e., human readable
characters), including check digit(s) the code contains. Set lengths for D 2 of 5
to any length, one or two discrete lengths, or lengths within a specific range.
! One Discrete Length - Select this option to decode only D 2 of 5
symbols containing a selected length. Select the length using the
numeric bar codes in Appendix D, Numeric Bar Codes. For
example, to decode only D 2 of 5 symbols with 14 characters, scan
D 2 of 5 - One Discrete Length, and then scan 1 followed by 4. To
correct an error or to change the selection, scan Cancel barcode.
! Two Discrete Lengths - Select this option to decode only D 2 of 5
symbols containing either of two selected lengths. Select lengths
using the numeric bar codes in Appendix D, Numeric Bar Codes.
For example, to decode only those D 2 of 5 symbols containing
either 2 or 14 characters, select D 2 of 5 - Two Discrete Lengths,
then scan 0, 2, 1, and then 4. To correct an error or to change the
selection, scan Cancel barcode.
! Length Within Range - Select this option to decode a D 2 of 5
symbol with a specific length range. Select lengths using numeric
bar codes in Appendix D, Numeric Bar Codes. For example, to
decode D 2 of 5 symbols containing between 4 and 12 characters,
first scan D 2 of 5 - Length Within Range. Then scan 0, 4, 1, and 2
(single digit numbers must always be preceded by a leading zero).