E18-2G4U04B User Manual CC2531 ZigBee USB Wireless packet capture tool
1 Overview 1.1 Brief Introduction E18-2G4U04B is a very small USB interface 2.4GHz band ZigBee protocol wireless packet capture tool designed and produced by EBAI. E18-2G4U04B uses the original imported CC2531 RF chip of Texas Instruments (TI) company in the United States. The chip integrates 8051 single-chip microcomputer and wireless transceiver. The factory firmware supports TI Packet Sniffer software to carry out packet capture test.
Chengdu Ebyte Electronic Technology Co., Ltd. E18-2G4U04B User Manual 2. Specification 2.1 Limit parameter Performance Main parameter Remark Min. Max. USB supply voltage（V） 0 5.5 Voltage over 5.5V will cause permanent damage to module PCB power supply voltage（V） 0 3.6 Voltage over 3.6V will cause permanent damage to module Chances of being burn down is slim when used in short distance Blocking power（dBm） - 10 Operating temperature（℃） -40 85 2.
Chengdu Ebyte Electronic Technology Co., Ltd. Main parameter Distance for reference E18-2G4U04B User Manual Description Remarks 200 m Test condition：clear and open area, antenna gain: 5dBi，antenna height: 2.5m，air data rate: 250kbps Protocol ZigBee Powered by USB Interface 1.27mm IC CC2531F256RHAT/QF N40 FLASH 256 KB RAM 8 KB Core 8051 MCU Size 59* 18mm Antenna PCB with housing 3 Size and pin definition Copyright ©2012–2018，Chengdu Ebyte Electronic Technology Co., Ltd.
Chengdu Ebyte Electronic Technology Co., Ltd. E18-2G4U04B User Manual No. Name Direction Function 1 P1.4 Input/output GPIO（see more from CC2531 datasheet） P1.5 Input/output GPIO（see more from CC2531 datasheet） P1.6 Input/output GPIO（see more from CC2531 datasheet） 4 P1.7 Input/output GPIO（see more from CC2531 datasheet） 5 VCC 2.0V—3.
Chengdu Ebyte Electronic Technology Co., Ltd. E18-2G4U04B User Manual 4.2 TI Packet Sniffer The factory firmware is with TI Packet Sniffer available, easy to use and test. With Packet Sniffer, user can do protocol analysis quickly. Click link below to download, http://www.ebyte.com/pdf-down.aspx?id=1093 5 Software Programming It is recommended to use the Code Composer Studio (CCS) Integrated Development Environment (IDE) for wireless connectivity.
Chengdu Ebyte Electronic Technology Co., Ltd. E18-2G4U04B User Manual After the ZigBee Alliance released the ZigBee 3.0 protocol, the latest ZigBee protocol stack is Z-Stack 3.0. Currently it supports CC2530 and CC2538. How do products carry out standard ZigBee test certification, what do you need to know and what process you need to take? Take the development of standard ZigBee Home Automation related products as an example.
Chengdu Ebyte Electronic Technology Co., Ltd. E18-2G4U04B User Manual address to NV, and use this address as the MAC address later. 4) If nothing is found in 3), a 64-bit variable is randomly generated and written to the NV as the MAC address. How can I prevent a node from continuously searching the network or increase the interval between sending Beacon Requests? End Device is a low-power device, battery supplied.
Chengdu Ebyte Electronic Technology Co., Ltd. E18-2G4U04B User Manual What's new in the ZigBee 3.0 protocol stack? Please refer to the link below for an introduction to the ZigBee 3.0 stack compared to the previous ZigBee Home Automation/ZigBee Light Link. http://processors.wiki.ti.com/index.php/What%27s_New_in_ZigBee_3.0 State machine switching on terminal devices in the TI ZigBee protocol stack http://www.deyisupport.com/question_answer/wireless_connectivity/zigbee/f/104/t/104629.
Chengdu Ebyte Electronic Technology Co., Ltd.
Chengdu Ebyte Electronic Technology Co., Ltd. E18-2G4U04B User Manual 7 FAQ 7.1 Communication range is too short The communication distance will be affected when obstacle exists. Data lose rate will be affected by temperature, humidity and co-channel interference. The ground will absorb and reflect wireless radio wave, so the performance will be poor when testing near ground. Seawater has great ability in absorbing wireless radio wave, so performance will be poor when testing near the sea.
Chengdu Ebyte Electronic Technology Co., Ltd. E18-2G4U04B User Manual 8 Production guidance 8.1 Reflow soldering temperature Profile Feature Curve characteristics Sn-Pb Assembly Pb-Free Assembly Solder paste Sn63/Pb37 Sn96.5/Ag3/Cu0.5 Preheat Temperature min （Tsmin） Min preheating temp. 100℃ 150℃ Preheat temperature max (Tsmax) Mx preheating temp.
Chengdu Ebyte Electronic Technology Co., Ltd. E18-2G4U04B User Manual 9 E18 series Model No. IC Frequency Hz E18-MS1PA1-IPX CC2530 2.4G E18-MS1PA1-PCB CC2530 E18-MS1-IPX E18-MS1-PCB TX power dBm Distance km Interface Package Size mm 20 1 IPX SMD 16 * 22.5 2.4G 20 0.8 PCB SMD 16 * 27 CC2530 2.4G 4 0.24 IPX SMD 14.1 * 20.8 CC2530 2.4G 4 0.2 PCB SMD 14.1 * 23 Revision history Version Date Description Issued by 1.0 2019-01-10 Initial version huaa 1.
