User's Manual

Chengdu Ebyte Electronic Technology Co., Ltd E104-BT5032A User Manual
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co., Ltd
43
7. Quick start
Recommended debugging and testing software：
 Serial tool on PC - SSCOM.exe;
 Ble debugging APP on phone- nRF connect.
7.1 Guidance for configuration mode
7.1.1 UART configuration
 Check if the module is in configuration mode（When not connected, it can be configured, otherwise, set pin mod as low level）
 Set SSCOM string related parameter（default：115200，8，1，none, no flow control）；
SSCOM parameter setting figure
 Refer to 6.4 command list to configure the module；
7.1.2 Configuration over air
 When module works as the slave, configuration over air is available.
 Open app “nRF connect”, start scanning device，find “E104-BT5032A” to connect；