User's Manual

Chengdu Ebyte Electronic Technology Co., Ltd E104-BT5032A User Manual
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co., Ltd
40
Remarks
1.
Take into effect immediately, do not save once power off.
2.
Only available for firmware：V1.1
6.4.53 AT+PINSET Set IOhigh and low level
command respond
Set AT+ PINSET =[pin],[sta]
+OK：Success
+ERR=[NUM]：Error
Parameter
1、PINis command pin. Refer to figure: GPIO function pins
2、staparameter：
sta（ASCII）
description
0
Low level
1
High level
Remarks
1.
Take into effect immediately, do not save once power off
2.
Only available for output mode
3.
Only available for firmware：V1.1
6.4.54 AT+PINGET Obtain IOhigh and low level
command respond
Set AT+ PINGET =[pin]
+OK=[sta]Success
+ERR=[NUM]：Error
Parameter
1、PINis command pin. Refer to figure: GPIO function pins
2、staparameter：
sta（ASCII）
description
0
Low level
1
High level
Remarks
1.
Take into effect immediately, do not save once power off
2.
Only available for input mode
3.
Only available for firmware：V1.1
6.4.55 AT+PWMCONF PWMconfiguration
command respond