User's Manual

Chengdu Ebyte Electronic Technology Co., Ltd E104-BT5032A User Manual
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co., Ltd
39
Parameter
para（ASCII）
description
0 Disconnect (default)
1 Disconnect and get into sleep
Remarks Take into effect immediately, save after power off
6.4.50 AT+SLEEP get into sleep mode immediately
command respond
Set AT+SLEEP +OK
Parameter
None
Remarks Take into effect immediately
6.4.51 AT+LOGMSG operating condition output
command respond
Query AT+LOGMSG? +OK=[para]
Set AT+LOGMSG =[para]
+OK：success
+ERR=[NUM]：error
Parameter
para（ASCII）
description
0 Disenable(default)
1 Enable
Remarks Take into effect immediately, save after power off
6.4.52 AT+PINCONF IOconfiguration
command respond
Set
AT+PINCONF =[pin],[mode]
+OK：Success
+ERR=[NUM]：Error
Parameter
1、PINis command pin. Refer to figure: GPIO function pins.
2、mode parameter is as follows
mode（ASCII）
description
0 Turn off(default)
1
input
2
output