User's Manual

Chengdu Ebyte Electronic Technology Co., Ltd E104-BT5032A User Manual
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co., Ltd
31
Disconnect all AT+DISCON
+OK：success
+ERR=[NUM]：error
Parameter
handle(ASCII)
description
0~7
Disconnect specified connection
Remark
1 Take into effect immediately.
2 As slave, only disconnect all is available；
3 Disconnect all is available for master and slave mode；
4 If handle specified connection is not connected, the module will return error;
5 For Handle please refer to 错误！未找到引用源。 multilink.
6.4.25 AT+DATDLY Data output delay
command respond
Query AT+DATDLY? +OK=[para]
Set
AT+DATDLY=[para]
+OK：success
+ERR=[NUM]：error
Parameter
para（ASCII）
description
0 close
1 enable(default)
Remarks
1 Take into effect immediately, save when power off
2 Turn on the output delay, the maximum packet size does not exceed 244 bytes;
3 Turn on the output delay. If the air packet input is too fast, the entire packet will be lost.
6.4.26 AT+MAC local MAC address
command respond
Query AT+MAC? +OK=[para]
Parameter
para（HEX）:MAC address
For example：F0E1D2C3B4A5
Remarks Take into effect immediately, save when power off
For example
Command：AT+MAC?
Return：2B 4F 4B 3D FE 30 EE 50 35 DA
Description：local MAC is FE 30 EE 50 35 DA
6.4.27 AT+PEERMAC connect to device MAC
command respond