User's Manual

Chengdu Ebyte Electronic Technology Co., Ltd E104-BT05 User Manual
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd
16
5.10 Request/Set iBeacon UUID
Command
Respond
Parameter
Request：AT+IBCNUUID?
+OK=[para1]
Para1：16 位 UUID
HEX
Set：AT+IBCNUUID=[para1]
+OK：success
+ERR=[NUM]:error
Description: Be effective at once
Example：Set iBeacon UUID as “FDA50693A4E24FB1AFCFC6EB07647825”
41 54 2B 49 42 43 4E 55 55 49 44 3D FDA50693A4E24FB1AFCFC6EB07647825
5.11 Request/Set IBCTXPWR
Command
Respond
Parameter
Request：AT+IBCTXPWR?
+OK=[para1]
Para1：00H~FFH
HEX
Set：AT+ IBCTXPWR =[para1]
+OK：success
+ERR=[NUM]：error
Description：Be effective at once，save when power off，sent in hexadecimal
For example change to hex"31 32”： AT+IBCTXPWR =12（12 is ASCII, convert to hexadecimal is: 31 32）
5.12 Read/Set device name（save when power off）
Command
Respond
Parameter
Request：AT+NAME?
+OK=[para]
Para: broadcast device name,
HEX、ASCII
broadcast name not more than 22
bytes
Set：AT+NAME=[para]
+OK：success
+ERR=[NUM]：error
Description：The next broadcast will take effects,save when power off
For example, set to “E104-BT05”：AT+NAME=E104-BT05
5.13 Read/Set device name(Do not save when power off）
Command
Respond
Parameter
Request：AT+NAME1?
+OK=[para]
Para: broadcast device name ,
HEX、ASCII
broadcast name not more than 22
bytes
Set：AT+NAME1=[para]
+OK：success
+ERR=[NUM]：error
Description：The next broadcast will take effects，do not save when power off
For example, set to “E104-BT05”：AT+NAME1=E104-BT05