User Manual

Chengdu Ebyte Electronic Technology Co., Ltd. E01-ML01SP2 User Manual
Copyright ©2012–2018
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
1
1. Overview
1.1. Brief Introduction
E01-ML01SP4 is SMD module based on original imported nRF24L01P
form Nordic in Norway, operates at 2.4Ghz with 100mW transmitting power.
The RF performance of E01-ML01SP4 and components selection during
R&D are all in accordance with industrial grade standards, using
industrial-grade high-precision 16MHz crystal oscillator, also it obtained FCC,
CE and RoHS certification. A power amplifier (PA) and a low noise amplifier
(LNA) are built in, so that the maximum transmit power reaches 100mW and
the receiving sensitivity is further improved. The products have been greatly
improved when there is no PA and LNA in design.
The user needs to use the MCU driver or use a dedicated SPI debugging
tool to develop E01-ML01SP4.
1.2 Features
 Communication distance tested is up to 1.5KM；
 Maximum transmission power of 100mW, software multi-level adjustable;
 Support air date rate of 2Mbps, 1Mbps, 250kbps;
 125 communication channels to meet the needs of multi-point communication, grouping, frequency hopping, etc.
 Connect to the MCU through the SPI interface at a rate of 0 to 10 Mbps.
 Support 2.0V~3.6V power supply, power supply over 3.3V can guarantee the best performance；
 Industrial grade standard design, support -40 ~ 85 °C for working over a long time；
 SMA interface for easy connection of coaxial cable or external antenna;
 Enhanced ShockBurst, fully compatible with NORDIC all nRF24L, nRF24E, nRF24U series.
1.3 Application
 Wearable device；
 Smart home and industrial sensors；
 Security system, positioning system；
 Wireless remote control, drone；
 Wireless game remote control；
 Healthcare products；
 Wireless voice, wireless headset；
 Automotive industry applications.