Tus neeg siv phau ntawv
Table Of Contents
- Disclaimer
- 1 Product overview
- 2 Specification and parameters
- 3 Size and pins definition
- 4 Recommended circuit diagram
- 5 Hardware design
- 6 E108-Product test
- 7 Command format
- 7.1 GKC interface data format
- 7.2 GKC command
- 7.2. Response message
- 7.2.2 System reboot
- 7.2.3 Erase auxiliary information
- 7.2.4 Low power mode
- 7.2.5 Message interval configuration
- 7.2.6 Periodic low power mode
- 7.2.7 Set star search mode
- 7.2.8 Save star search mode
- 7.2.9 Serial port parameter setting
- 7.2.10 Set NMEA output
- 7.2.11 GPD document delete
- 7.2.12 Set NMEA serial port parameter
- 7.2.13 PPS configuration
- 7.2.14 Query message interval
- 7.2.15 Return message interval
- 7.2.16 Set NMEA output frequency
- 7.2.17 Query NMEA output frequency
- 7.2.18 Return the NMEA output frequency
- 7.2.19 Set reference coordinates
- 7.2.20 Query Reference Coordinate System
- 7.2.21 Return Reference Coordinate System
- 7.2.22 Query RTC time
- 7.2.23 Return RTC time
- 7.2.24 Set the speed threshold
- 7.2.25 Set HDOP Threshold
- 7.2.26 Get HDOP Threshold
- 7.2.27 Version number query
- 7.2.28 Return the current version number
- 7.2.29 Set location and time information
- 7.2.30 Set positioning mode
- 7.2.31 Query ID information
- 7.2.32 Return ID information
- 7.3 Support NMEA0183 protocol
- 8 GDP User Guidance
- 9 FAQ
- 10 Welding instruction
- 11 E108 Series
- 12 Packing for batch order
- Revision history
- About us
Copyright ©2012–2021，Chengdu Ebyte Electronic Technology Co.,Ltd.
26
8.7.4 Send GPD transfer end statement and wait for response
.................................................................................................31
8.7.5 Switch BINARY reception to NMEA reception mode
.........................................................................................................31
9 FAQ......................................................................................................................................................... 32
9.1 COMMUNICATION RANGE IS TOO SHORT ........................................................................................................................................ 32
9.2 MODULE IS EASY TO DAMAGE ..........................................................................................................................................................32
9.3 BER(BIT ERROR RATE) IS HIGH ...................................................................................................................................................... 32
10 WELDING INSTRUCTION .............................................................................................................33
10.1REFLOW SOLDERING TEMPERATURE .............................................................................................................................................. 33
10.2 REFLOW SOLDERING CURVE........................................................................................................................................................... 33
11 E108 SERIES ....................................................................................................................................... 34
12 PACKING FOR BATCH ORDER ...................................................................................................34
REVISION HISTORY............................................................................................................................ 34
ABOUT US ................................................................................................................................................35