Tus neeg siv phau ntawv
Table Of Contents
- Disclaimer
- 1 Product overview
- 2 Specification and parameters
- 3 Size and pins definition
- 4 Recommended circuit diagram
- 5 Hardware design
- 6 E108-Product test
- 7 Command format
- 7.1 GKC interface data format
- 7.2 GKC command
- 7.2. Response message
- 7.2.2 System reboot
- 7.2.3 Erase auxiliary information
- 7.2.4 Low power mode
- 7.2.5 Message interval configuration
- 7.2.6 Periodic low power mode
- 7.2.7 Set star search mode
- 7.2.8 Save star search mode
- 7.2.9 Serial port parameter setting
- 7.2.10 Set NMEA output
- 7.2.11 GPD document delete
- 7.2.12 Set NMEA serial port parameter
- 7.2.13 PPS configuration
- 7.2.14 Query message interval
- 7.2.15 Return message interval
- 7.2.16 Set NMEA output frequency
- 7.2.17 Query NMEA output frequency
- 7.2.18 Return the NMEA output frequency
- 7.2.19 Set reference coordinates
- 7.2.20 Query Reference Coordinate System
- 7.2.21 Return Reference Coordinate System
- 7.2.22 Query RTC time
- 7.2.23 Return RTC time
- 7.2.24 Set the speed threshold
- 7.2.25 Set HDOP Threshold
- 7.2.26 Get HDOP Threshold
- 7.2.27 Version number query
- 7.2.28 Return the current version number
- 7.2.29 Set location and time information
- 7.2.30 Set positioning mode
- 7.2.31 Query ID information
- 7.2.32 Return ID information
- 7.3 Support NMEA0183 protocol
- 8 GDP User Guidance
- 9 FAQ
- 10 Welding instruction
- 11 E108 Series
- 12 Packing for batch order
- Revision history
- About us
Chengdu Ebyte Electronic Technology Co.,Ltd. E108-GN User Manual
Copyright ©2012–2021
，
Chengdu Ebyte Electronic Technology Co.,Ltd.
2
18
6.2 Operating naviTrack
For the convenience of use, we recommend using the exclusive tool TaviTrack for debugging. For details, see the "naviTrack User Manual".
1. Run naviTrack with administrator privileges and run the following page:
2. Select the corresponding com port and click connect. After the connection is successful, you can see the reported data in the NMEA window.
Note: For the detailed meaning, please refer to the description in Section 3 NMEA0183 protocol.
3. After the positioning is successful, the latitude and longitude information can be obtained in the $GPRMC field reported by the serial port.
For more detailed tool usage information, please refer to the tool.
manual in the kit.