Tus neeg siv phau ntawv
Table Of Contents
Chengdu Ebyte Electronic Technology Co.,Ltd E95/E96-DTU(433Lxx-485)-V8 User_Manual_EN
Copyright ©2012–2022，Chengdu Ebyte Electronic Technology Co.,Ltd.
3
5 If the customer needs to switch the working mode, it can be controlled by the Mode button to switch between different
working modes (M0 indicator, M1 indicator). Hold and press the Mode button for 1 second and release it to switch the
mode once. The mode switching details are shown in the table below:
No.
Type
M1
M0
Description
Mode 0
Transparent
Transmission
Mode
Light
Off
Light
Off
Serial port open, wireless open, transparent transmission
(factory default mode)
Mode 1
WOR Mode
Light
Off
Light
On
WOR transmission mode, data packet comes with wake-up code
Mode 2
Power Saving
Mode
Light
On
Light
Off
WOR receiving mode, saving its own receiving power
consumption, this mode cannot transmit
Mode 3
Configuration
Mode
Light
On
Light
On
The DTU can be programmed using the configuration software
Note:
The DTU has a power-down save mode function (the factory default setting is transparent transmission mode), the user
needs to switch the corresponding mode according to the M1 and M0 indicators (effective immediately).
"Quick Start" uses "E95-DTU (433L20-485)" as an example, other models refer to the configuration, pay attention to the
power input of the AC equipment.