User Manual

Hum Eliminator™
• Eliminates AC hum / 60Hz buzz and noise, quick
and easy
• Breaks ground loop safely, while leaving all signal
grounds intact
• Automatically translates signal voltages to match
differences in ground potentials, avoiding clipping
• Converts automatically back and forth between
balanced and unbalanced lines at either end
• 1/4" TRS “smart” jacks (tip, ring, sleeve) inputs
and outputs.
• Completely passive design with audiophile quality
components assures the best possible noise and
distortion performance
• Frequency response 20Hz to 70kHz plus or minus
0.5dB
• Distortion less than 0.005% THD @ 1kHz
• Crosstalk better than –97dB
• Maximum source impedance 1kOhm. Minimum
load impedance 10kOhm
• Available in 2 channel box or 8 channel single
space rack versions
• 2 Year warranty. Ebtech quality and reliability
• Made in the U.S.A.
Line Level Shifter™
• Converts back and forth between –10dBV and
+4dBu
• Converts automatically back and forth between
balanced and unbalanced lines at either end
• 1/4" TRS “smart” jacks (tip, ring, sleeve) inputs
and outputs.
• Built-in Hum Eliminator™ technology eliminates
AC hum / 60Hz buzz and noise
• Automatically translates signal voltages to match
differences in ground potentials, avoiding clipping
• Completely passive design with audiophile quality
components assures the best possible noise and
distortion performance
• Frequency response 10Hz to 40kHz plus or minus
1dB into 10kOhm load
• Distortion less than 0.002% THD @ 1kHz
• Crosstalk better than –97dB
• Maximum source impedance 1kOhm. Minimum
load impedance 10kOhm
• Available in 2 channel box or 8 channel single
space rack versions
• 2 Year warranty. Ebtech quality and reliability
• Made in the U.S.A.
EBTECH®
A Division of Sound Enhancement Products, Inc.
185 Detroit Street Cary IL 60013
Ph [phone] Fax [phone]
www.ebtechaudio.com