EBS OCTABASS - BLUE LABEL EDITION USERS MANUAL www.ebssweden.
USERS MANUAL EBS OCTABASS - BLUE LABEL EDITION THANK YOU FOR PURCHASING THE EBS OCTABASS - BLUE LABEL EDITION PEDAL! The EBS OctaBass analog octave divider creates a single note one octave below the pitch of the played note, adding a new dimension to your sound. The incredibly fast tracking allows rapid playing techniques to be accurately reproduced. The Blue Label edition include a new Tone control to improve the ability to shape the tone character of the suboctave note created when using the OctaBass.
EBS OCTABASS - BLUE LABEL EDITION USERS MANUAL THE CONTROLS TONE TONE changes the character of the suboctave note. A higher setting gives the most synthesized type of sound, and suits best when using the pedal with guitar and other high-pitched instruments. Use lower settings for more sub-bass type of sounds. NORMAL NORMAL Controls the mix volume for the original ”bypassed” sound, from 0% (off) to 100% (max). OCTAVE OCTAVE Sets the amount for the octave divided signal, from 0% (off) to 100% (max).
USERS MANUAL EBS OCTABASS - BLUE LABEL EDITION POWER OPTIONS DC POWER ADAPTOR For environmental reasons, we recommend the use of a DC Power Supply, such as the EBS AD-9 Pro. The EBS OctaBass Blue Label Edition handles 9-18 V DC, and require a 2.1 mm pin center negative type of connector. BATTERY This pedal can run on battery (not included). To place a battery in the pedal follow these steps. 1) Remove the four screws holding the bottom plate. 2) Carefully remove the bottom plate.
EBS OCTABASS - BLUE LABEL EDITION USERS MANUAL HOW TO SET THE SOUND - USEFUL HINTS In order to obtain best possible operation from the EBS OctaBass, check the hints below on how to improve and find your own personal sound. 1) If you are using more than one pedal, make sure that the OctaBass is one of the first ones plugged in, closest to the instrument. 2) Avoid using the effects loop on amplifier. Many amplifiers have the low end cut-off which causes poor triggering.
USERS MANUAL EBS OCTABASS - BLUE LABEL EDITION SAMPLE SOUND SETTINGS The following examples below show a few of the many sonic possibilities of the EBS OctaBass. TONE OCTABASS CLASSIC This is the classical OctaBass sound setting, as found on previous EBS products. Use high setting for Normal and moderate on Octave for best personal result. SUB-BASS OCTAVE This is a very useful setting for spicing up the low-ends of your sound.
EBS OCTABASS - BLUE LABEL EDITION USERS MANUAL TROUBLE SHOOTING GUIDE Please consult the following checkpoints, before consulting one of the authorized EBS service centers. Checkpoint 1) Does the cable(s) work properly? Action if answered NO - Replace cable(s). 2) Are the 1/4” plugs properly connected all the way in? - Push the 1/4” plugs all the way in.
USERS MANUAL EBS OCTABASS - BLUE LABEL EDITION TECHNICAL SPECIFICATIONS EBS OCTABASS Blue Label Edition Nominal Input Level Input Impedance Output Impedance Dry Bandwidth +0/-2 dB Dry Level min/max Octaver Level Gain min/max Octaver Tone Filter: Type Slope Range Triggering Threshold -10 dBv 1.8 Mohms 100 ohms 20 - 20k Hz -oo / 0 dB -oo / 12 dB min Low Pass >18 dB/octave 60 - 350 Hz -70 dBv @200 Hz Dimensions W x H x D 2.6” x 4.5” x 1.9” (67 x 115 x 48 mm) Weight 315g (0.7 lb.
