USERS MANUAL EBS MICROBASS 3 EBS MICROBASS 3 USERS MANUAL www.ebssweden.
USERS MANUAL EBS MICROBASS 3 CHANNEL CONTROLS, SWITCHES & OUTPUTS CLEAN CHANNEL = WHITE KNOBS DRIVE CHANNEL = BLACK KNOBS BOTH CHANNELS = GRAY KNOBS BLEND sets the mix level between the clean channel and drive channel when the drive channel is active. To jump between the Clean and Drive channels, set this knob to the max position and set the Serial switch to Off. MID is a peaking filter for the drive channel. The two knobs works in conjunction.
USERS MANUAL EBS MICROBASS 3 A/B FX SEND & RETURN. EBS MicroBass3 is provided with an effects loop for use with external units such as box or rack effects. The loop puts the external effects after both channels EQs and the channel selector (Drive footswitch). C STEREO MODE ON/OFF. By pushing this switch the return jack goes into TRS operation for stereo mode. When active, the Balanced Outputs will turn into Left and Right outputs rather than post/pre.
USERS MANUAL EBS MICROBASS 3 USERS MANUAL EBS MICROBASS 3 TECHNICAL SPECIFICATIONS - MICRO BASS 3 Clean Channel: Input Impedance: Gain: Character: Bright: Filter Section: Bass Filter: Mid Filter: Treble Filter: COMP/LIMIT: Parallel mode Serial mode Gain Range Gain Peak LED Frequency Response Filter Type Gain: Filter Type Gain: 1.5 Mohms // 44 pF 10 Mohms // 22 pF min/max -oo/+30 dB +10 dBv +0/-3 dB 20-20.000 Hz Shelving High/Low Pass Lo +6 dB @ 80 Hz Mid -2 dB @ 900 Hz Hi +3 dB @ 7.5 kHz Shelving.
EBS MICROBASS 3 BLOCK LAYOUT SCHEME - MICRO BASS 3 USERS MANUAL www.ebssweden.
