User guide

16-8-2010 5 033000=15090C
Please Note - Only use new batteries, some remote functions can fail if old batteries are
used. Never use a combination of new and used batteries.
Battery Saving Feature
By default, the TAKE 10 LCD automatically turns off if no keys are pressed for more than 30
seconds. This helps in extending the life of your batteries. The length of time before the LCD
screen turns off can be adjusted from 2 seconds to 35 seconds. Refer to Advanced Settings in
Chapter 8 for information on how to do this.
Memory
All the devices you set up, their codes, Punch-through settings, your favourites, etc., are
stored in permanent memory whilst you are changing batteries. As a result you will not lose
any of your stored settings when the batteries need replacing.
3. Button Functions
[1] His
/ Hers
Quick access keys for favourites stored under His/Hers groups.
[2] POWER
Turns current device On or Off.
[3] SIDE KEYS
Used to access on-screen features.
[4] LCD
Liquid Crystal Display
[5] MODE
Brings up AV device selection screen on the remote
[6] FAVOURITE
Access favourite groups on the remote LCD.
[7] HOME
Brings up the main menu on the remote LCD.
[8] CHANNEL UP/DOWN
Changes channels, chapter skip function for DVD players, track skip for Audio players.
[9] VOLUME UP/DOWN
Changes the volume level of the device.
[10] OK
Selects menu items for the device you are controlling, or confirms selections on the screen.
[11] MENU
Brings up the Menu screen.