User guide

16-8-2010 26 033000=15090C
• Press the Security Side Key.
• Press the Side Key to select the SC28/SC9100.
• At the Security Options [33] screen, press the Side Key to Set Password [34].
• Enter your 4-digit security code using the alphanumeric keys. (This is your choice; do not
forget your security code.)
• Press the Side Key for the Set Console Link [35].
• Following the screen instructions to set your console to program mode by pressing and
holding the OK key until the console chimes.
• Press the Side Key for Done.
[33] [34] [35] [36]
To use the SC28/SC9100 do the following:
• Press the Mode key.
• Press the X10 Side Key.
• Select the room that has the security console by pressing the Side Key.
• The options screen for the security console appears. Use the Side Key for the option that you
want to use [36].
• The Enter Code screen appears. Enter your password to execute your choice.
• Press Back to leave the Enter Code screen.