User guide

16-8-2010 21 033000=15090C
Lamp Module
The Lamp Module may be used to control any incandescent lamp rated up to 300W. It is not
suitable for other types of lamps such as fluorescent, energy saving lamps, or lamps that
include a dimmer control.
Caution: Do not connect an appliance such as a coffee pot or heater to the Lamp Module.
It may damage the module and the appliance and could cause a fire hazard.
 Set the House Code to ‘B’ and the Unit Code to ‘3.’ (In this example, B3 matches
the remote’s address for this device.)
 Plug a lamp into the Lamp Module.
 Plug the Lamp Module into a convenient AC outlet.
[24] [25] [26]
9. Advanced Options
Press the HOME key, select Setup, then Advanced.
The Advanced screen lets you change the backlight delay, enter codes for devices directly
from the printed code list that is in the back of this manual, set up ‘punch-through’ for various
devices, limit the channels that young children watch and clear remote settings.
Display Options
Select ‘Options’, then press the Side Key to the left or the right of the option to adjust the
setting.
Press OK to save the settings.
‘Backlight’ adjusts how long it takes before the screen goes black if you don’t press any keys
(range is 2 – 35 seconds).
‘Key Transmit Time’ changes the delay between digits when sending favourites, e.g. 4-0-1,
where the – represents time between the transmitted digit.
This is useful when a device requires time between each digit press to recognise a channel.
Device Codes
Select ‘Device Codes’, then select a device, as per screen [27].
Devices that have not yet been set up are greyed out.
You can select these devices here and set them up by manually
entering the code, or you can change the code of an existing device
by simply entering the new code.
This screen [27] also lets you view the codes for any device that’s been
set up, you can see the codes are set for TV, Cable, and SAT.
Screen [27] shows that CD has been selected and the 4 digit code is
ready to be entered using the numbers on the remote.
Screen [27] also shows that we have learned codes under the AUX1 key in [27]
DVD mode.