User manual

March 2013 IPV68
54
3.7 Indicator Settings
Figure 8.7
Set the pilot lamp mode, to one of the following three options:
(1) Non-connected network out: Flicker while connected to the internet and turn off when
disconnected.
(2) Non-connected network with more slow-frequency flicker: Flicker while connect to the internet
and more slower when disconnected.
(3) Extinguished: Stay OFF.
3.8 Backup & Restore
Figure 8.8
1）Backup: Backup all the IP Camera Parameters, if you want to save all the current settings that you have
set already, you can click Submit, then all the parameters you set will be stored as a parameters bin file.
2）Restore: Restore all the IP Camera Parameters, if you want to change the camera’s settings to a certain
status which has a backup, click Browse to load the bin file, then Submit it.
Log
Figure 8.9