User manual

March 2013 IPV68

2.1.3 Upgrade Device Firmware

If you want to upgrade the camera, please upgrade Device Firmware first, then upgrade Web UI.

Click Browse and choose correct bin file, then click Submit to do upgrading.

NOTE: Before doing an upgrade via Browser, please make sure the IP Camera Tool of your computer could

find the camera’s IP.

Attention: Please keep the power on during upgrading, and it’s better to use wired mode via network

cable.

Please don’t upgrade unnecessarily, wrong operation or incorrect upgrade bin file can damage the camera.

Figure 5.4

2.1.4 Restore Factory Settings

Click Restore Factory Settings, will pop-up a prompt, select OK, all the parameter will be returned to

factory settings, and the device will reboot.

Figure 5.5