Pan & Tilt Dome IP Camera with 3x Zoom and Night Vision – IPV68 User Manual User guide 3 Bedienungsanleitung . Gebruiksaanwijzing . Användarmanual . Guide utilisateur . Guía del usuario . Manual do utilizador . Manuale per l’utente . Before using our product, please read this documents carefully.
Index 1.0 Introduction 1.1 Features 1.2 Packing List 1.3 Product Views 1.3.1 Front View 1.3.2 Rear Panel 1.4 PC System Requirements 1.5 Hardware Installation 1.6 Software Installation 1.7 IP Camera Tool 1.7.1 Six Options Available 1.7.2 Basic Properties 1.7.3 Network Configuration 1.7.4 Upgrade Firmware 1.7.5 Refresh Camera List 1.7.6 Flush Arp Buffer 1.7.7 About IP Camera Tool 1.8 Camera Login 1.8.1 For IE Browser 1.8.2 For Safari, Firefox, Google Browser 1.8.
2.7.4 Belgian Customers with Telenet Modem/Router 3.0 Settings 3.1 System Settings 3.1 Device Info 3.2 Alias Settings 3.3 Settings 3.4 Date & Time Settings 3.5 Users Settings 3.6 Pan, Tilt, (PTZ) Settings 3.7 Indicator Settings 3.8 Backup & Restore 3.9 Other Settings 3.10 Mail Service Settings 3.11 FTP Service Settings 3.12 Alarm Service Settings 3.12.1 Motion Detect Armed 3.12.2 Motion Detect Sensitivity 3.12.3 Alarm Input Armed / IO Linkage on Alarm 3.12.
1.0 INTRODUCTION This is an integrated wireless IP Camera solution. It combines a high quality digital Video Camera with network connectivity and a powerful web server to bring clear pictures to your Desktop from anywhere on your local network or over the Internet. The main function of the camera is to transmit remote video over IP network. The high quality video image can be transmitted with 30fps speed on the LAN/WAN by using MJPEG hardware compression technology.
1.3 1.3.1 Product Views Front View Figure 1.1 1 Light Sensitive Hole: For light sensitive photocell 2 Infrared LED: 10 LEDs 3 LENS: CMOS sensor with fixed focus lens. 4 Network Indicator LED: If there is network activity, the LED will blink 5 Microphone: Build-in microphone 6 Speaker: Build-in speaker 7 Wireless Antenna: Wi-Fi Antenna 1.3.2 Rear Panel Figure 1.
LAN: RJ-45/10-100 base T Power: DC 5V/2A power supply Network Light: The green LED is on when connected to the network, the yellow LED blinks when data is transferred. Audio Output: The jack is used to connect an external speaker I/O PINS: 1: Output A 1.4 2: Output B 3: Alarm input 4: Input (GND) PC System Requirements System configuration requirements: CPU: 2.06 GHZ or above. Memory: 256M or above. Network Card: 10M or above. Display Card: 64M or above memory.
1.5 Hardware Installation You need to set up your camera using a network cable (wired) first, before you can use it wirelessly, so let’s start with plugging in the network cable. Follow the steps below to set up your camera hardware. 1. Plug one end of the network cable into the camera, and the other end into an empty port of your router/switch/modem. 2. 3. 4. 5. Install the Wi-Fi antenna. Plug the power adaptor into the camera and into an AC outlet.
3. Open the “ebode IP Vision Software” folder and double click “IPCamSetup.exe” then click next to complete the software installation.
For Microsoft Windows users only: In order to run smooth we will need to install the “ActiveX App” on each sy we would like to use to visit the camera. The “AppInstall” file is located in the same folder as the “IPCamSetup” from the previous steps. Please take the following steps: 4. ActiveX: Double click “Appinstall.exe”—“Next”—“Install”—“Finish”. Figure 1.5 Figure 1.
Figure 1.7 Figure 1.8 After the systems has been restarted, the icon “IP Camera Tool” will be displayed on your desktop. CAUTION: Before installing and using the product, please read the following precautions carefully and make sure they are fully understood. Use only the power adaptor included with the product. Use of an unauthorized power adapter may cause damage to your IP Camera. Do not touch the lens of the IP Camera. The optimum focus range has been set for you.
Do not turn the Pan/Tilt by force, it may cause damage to internal components of the Pan/Tilt mechanism. For firmware upgrading or connection with an external device, refer to detailed instructions contained in the CD. WARNING : On the first run of the program “IP Camera Tool” you might get a Windows Security Alert Popup. It will ask you to choose a setting for the firewall. Please make sure you choose the ‘UNBLOCK’ option. Your IP camera will not work without unblocking the firewall settings. 1.
Note: The software searches IP Servers automatically over your LAN. It may take a few minutes before the IP address appears in the list. There are 3 cases: 1. No IP Cameras found within LAN. After about 1 minute search, the Result Field will show “not found IP Server” and the program shut down automatically. 2. IP Cameras have been installed within LAN. All the IP Cameras will be listed and the total number is displayed in the result field as shown in Figure 1.9. 3.
1.7.1 Six Options Available Choose the IP Camera and Click the right mouse button on that camera, there are six options: (Figure 2.0). Basic Properties, Network Configuration, Upgrade Firmware, Refresh Camera List, Flush Arp Buffer, About IP Camera Tool. Figure 2.0 2.7.2 Basic Properties There is some device information in the Basic Properties, such as Device ID, System Firmware Version, and Web UI Version.（Figure 2.1).
2.7.3 Network Configuration Below shows how you can configure the Network parameters. Figure 2.2 Obtain IP from DHCP server: If clicked, the device will obtain IP from DHCP server. In other words, the camera will have a dynamic IP. (Make sure the Router which the camera connects to has DHCP function and DHCP is enabled). (Figure 2.2). Figure 2.3 IP address: Fill in the IP address assigned and make sure it is in the same subnet as the Gateway, and the subnet should be the same as your computer or router.
Http Port: LAN port assigned for the equipment, default is 80. You could set another port number like 81, 801, 8001 etc. User: Default administrator username is: admin (please make sure all are lowercase letters). Password: Default password is bank, i.e. no password. NOTE: When the prompt “subnet doesn’t match, double chick to change!” appears, please set the IP Address, Subnet Mask, Gateway, DNS Server once again, or enable Obtain IP from DHCP server. 2.7.
2.7.7 About IP Camera Tool Check the IP Camera Tool Version and IP Camera ActiveX Control Version here. 1.8 Camera Login You can access the camera through IP Camera Tool or Internet Explorer (IE), Firefox, Safari, Google Chrome or other standard browser directly. 1. Double click the IP address of the IP Camera listed (Figure 1.9). Select your language and browser you use. Note that IE Browser stands for “Internet Explorer” which is Microsoft Windows default browser.
The following screen will pop up after pressing “Enter”: Figure 2.6 The default user name is admin, no password (please leave password blank) Input the correct user name and password, the Sign In interface will pop-up. There are three models to login (figure 2.7). Figure 2.7 (1) “Active Mode” (For IE Browser): available in Internet Explorer 6.0 or above. (2) “Server Push Mode”: available in Firefox, Safari, and Google Chrome browser.
1.8.1 For IE Browser (Microsoft Windows default browser “Internet Explorer”) Choose Active Mode (For IE Browser), and sign in. Figure 2.8 The first time you login to the camera, you might get an ActiveX prompt as in the picture above, please click the prompt and choose Run Add-on, refresh and login to the camera again, then will see live video, as below: Figure 2.
Figure 3.0 Note: If there is still no live video after you run ActiveX, and a red cross shows in the center of the screen, or even just a black screen, please try to enable the ActiveX options of IE security settings. (Did you install the ActiveX App from step 4 in chapter 1.6, Figure 1.5?) Please take the following steps: 1. Close the firewall of your computer. 2.
Figure 3.1 In addition: you can also click “Start” menu->“Internet Explorer”, choose “Internet attributes “ to enter, or via “Control Panel” ->“Internet Explorer”, enter to Security setting. If you allowed the ActiveX to run, but still could not see live video, only a Red Cross of the video, and the device status light changed to yellow color in the center not green, please change to another port number. Don’t use port 80, use another port such as 128, 1008 etc. Figure 3.
Figure 3.3 2.8.3 For Mobile Phone Choose Sign in mobile phone, and sign in. Mobile phone doesn’t support ActiveX, so only some basic functions are available in this mode. It supports iPhone, Smart phone, 3G phone, etc. Normally, if the mobile phone supports network video, then it should work with your IP Camera. The ebode IP Vision app for iPhone® supports all features, see step 3.23. Figure 3.
1.9 ActiveX Mode (For Internet Explorer) Login to the camera in ActiveX mode, the main User Interface is as below: NOTE: There are 3 levels of users, Visitor, Operator, Administrator, if you login with different users, the use authority is different. (See 3.11 User Settings, Figure 8.5). 1.9.1 For Visitor When you login as Visitor, you can enter the IP Camera for visitor. Visitor is the lowest level with only some operation available. Figure 3.
Status of Channels: There are 9 icons at the bottom of the UI which show the status of each channel of the camera. Grey color, means there is no device connected to the main device for this channel. Green color, means the device is connected for this channel, and it works well. Red color, means the device for this channel is recording. Yellow color, means this channel is set in multi-device already, but it fails to connect to the main device. OSD Settings: Figure 3.
Rate and Resolution: Rate: Set video frame here, from “full-speed to 1fp/5s”. (Figure 3.8). Resolution: Set the resolution to be 160*120/ VGA (640*480)/ QVGA (320*240). (Figure 3.9). NOTE: When doing recording, Rate and Resolution parameter settings is very helpful for getting smaller sized record files, lower the parameter to get a smaller file. Figure 3.8 Figure 3.9 TOP Menu: Figure 4.0 Click to get live video. When you want to get back to live video from other menus, just click it.
1.9.2 For Operator When you login as Operator, you can enter the IP Camera for Operator. For operator, it not only supports all the functions for Visitor, but also supports these functions below: Figure 4.1 Audio Video Settings Figure 4.2 Audio buffer: Click this icon, it will show five numbers, which means 1/2/3/4/5 seconds buffer of audio. Reversal: Click this icon to reverse (flip) the image. Click again to go back to normal. Mirror: Click this icon to see a mirror image.
Mode: This mode is optional, 50HZ/60HZ for the users who use 50HZ/60HZ frequency, outdoor for users who want to use the camera to monitor toward an outdoor environment. Bright: Set the parameters to adjust the image quality of the video. Click to adjust the value. Contrast: Set the parameters to adjust the image quality of the video. Click to adjust the value. Default all: Click it to set all the parameters back to the factory setting.
Set Preset Position. It supports 15 preset positions. To control the camera’s rotation to a preset position, click Set Preset Position button it will pop-up a dialog frame (Figure 4.5), choose the number (1-15) you want to set it to. NOTE: if you set different positions with the same number, the camera will record the last position setting only. Call Preset Position. It supports 15 preset positions.
2.1 Multi-Device Settings Multi-Device Settings This camera can support max. 9 device channels at the same time. 2.1.1 Set Multi-Device in LAN In the Multi-Device Settings page, you can see all devices searched in LAN. The 1st device is the default one. You can add more cameras listed in LAN for monitoring. This web software supports up to 9 IP Cameras online simultaneously.
Click Live Video and then select to see four channels, or click to see nine channels. Figure 4.8 Figure 4.9 2.1.2 Set Multi-Device for WAN If you want to view cameras from the internet, you have to add these devices by DDNS domain name. Make sure all these cameras you want to add have been set DDNS successfully. (View 3.7 DDNS Service Settings) And also these cameras work well with DDNS. Login to the first camera by DDNS domain name and port, this camera will be as the host camera.
Figure 5.0 Click Multi-Device, select Multi-Device Settings. Choose the 2nd Device; fill in the 2nd camera’s Alias, Host, Http Port, User, Password, click Add. Set more devices in the same way, after all done, click Submit. NOTE: The Alias is optional; you can set the alias as you wish. The Host must be the camera’s DDNS domain name, and without “http://”, it’s not the LAN IP address.
Note: Add the other camera in the same way, Click submit to add all of them. Figure 5.2 Click Live Video and then select to see four channels, or click to see nine channels. In this case, you can see all the cameras from a remote position by internet, for example, if you are on a business trip, you can use the first camera’s (Host camera) DDNS to view all the devices via the internet. Figure 5.
2.1.3 Upgrade Device Firmware If you want to upgrade the camera, please upgrade Device Firmware first, then upgrade Web UI. Click Browse and choose correct bin file, then click Submit to do upgrading. NOTE: Before doing an upgrade via Browser, please make sure the IP Camera Tool of your computer could find the camera’s IP. Attention: Please keep the power on during upgrading, and it’s better to use wired mode via network cable.
2.1.5 Reboot Device Click Reboot the device, will pop-up a prompt, select OK, then the device will reboot Figure 5.6 2.2 Network Settings Click Network, will pop-up the prompt as below: 2.3 Basic Network Settings Here you can fix the camera’s IP address; i.e., set the static IP address of the camera manually. You can also do these settings from IP Camera Tool. (Figure 2.3). There are some good reasons to give the camera a static IP.
Figure 5.7 If you don’t know the Subnet Mask, Gateway, DNS Server. Please check the Local Area Connection Status of your computer; it contains all this information, steps as below: 1. Control PanelNetwork ConnectionsLocal Area Connections (Lan) Support Details 2.
Figure 5.8 Figure 5.9 If you don’t know the DNS Server, you can set it the same as Gateway. Most routers will support DHCP functions, you can choose “Obtain IP from DHCP Server” to get dynamic IP, however we strongly recommend you to use a Static IP for remote login to the camera (see step 3.3)! Figure 6.
Http Port: In most cases your Internet Service Provider blocks this port (80), you may change it to another port number such as 85 or 86 or any number above 80. Make sure that if you have more than one camera it might be useful to give each camera a unique port number, but it`s not necessary to do this. 2.4 Wireless LAN Settings Figure 6.1 Setup a wireless connection for the camera with our wireless router by following these steps: 1. Make sure the router is a wireless router. 2.
4. Login to the camera with the IPCamera Tool or manual using your Browser. (Figure 2.8) 5. Click “Network”>”Wireless Lan Settings”>”Scan”, please press scan 2 times, then you will find the WLAN the list, choose the one you use. (Figure 6.2). Figure 6.1.1 Figure 6.
Please note that the (tree view) menu (Figure 6.1.1) can look different on different computer systems depending on the resolution of the screen used. Figure 6.1.1 shows that we had to scroll over with our mouse and click “Network” inside the tree view on the left and that the options unfold in the tree view itself. After clicking “Network” you will see something like Figure 6.1.1. 6. Select your Wireless network in the list, please look careful and select the right one.
Figure 6.3 Figure 6.4 Figure 6.
2.5 ADSL Settings (most users won`t need to use this option) When connected to the Internet through ADSL directly, you can enter the ADSL username And password obtained from ISP. Figure 6.6 2.6 Figure 6.7 UPnP Settings If we want to be able to see our camera live video from a computer outside our network, for example when we are at work, we have to do some advanced settings in our router. For most people this will be a difficult step, but we will try to help you out.
Figure 6.8 Select it and click Submit, then the camera will support UPnP port forwarding automatically. It’s helpful for using DDNS (viewing live video from outside our network). As soon as you have enabled UPnP in you router, please proceed with the next steps. Figure 6.9 NOTE: UPnP is only for port forwarding. It relates to the security settings of your router, make sure the UPnP function of your router is enabled, before you continue.
This domain is provided by the third party, such as Dyndns, Oray, 3322 etc. Figure 7.1 Third Party DDNS If you use third party DDNS, please choose the server you use, such as “3322.org” or “dyndns.org” as below: Figure 7.2 Figure 7.3 You have to register an account first, enter the user, password, and host. NOTE: Only one DDNS can be chosen, for example, if you use the manufacturer’s DDNS, the third party one won’t work, if you use the third party DDNS, the manufacturer’s one won’t work.
2.7.1 To change the camera’s port. (Always change your port!) Open the IP Camera Tool from your Desktop select the ebode camera (it will turn blue) and right-mouse click and choose network configuration. The default port of camera is “80”, please change “80” to any other one you like, such as “81”, “100”, “8091” etc. Click “OK”, the camera will reboot, wait about 30 seconds. Figure 7.4 3.7.
Congratulations! You’ve know successfully installed your IP camera. It is always a good idea to ask friends or family to login to the camera from their own place. Don’t forget to change the password of the camera afterwards! Please save this manual for additional features. The following steps in this manual are only needed if the camera is not accessible from outside the network, or if you want to use additional features.
Next, type in ‘ipconfig’ and press enter. Please refer to below image. Finally, you can see the default gateway address and Subnet Mask as shown in the image below.
Now we know the default gateway address we only need to know the username and password of your router. Some routers have a sticker on the bottom with the factory username and password, other ones don`t have a password, and the password can also be set by the user or mechanic. There is a very handy website with allot of router brand information like default IP address, default username and password etc. Please note we only refer to this website, we do not maintain or support it.
4. Select NAT Setup. Please note that for each brand this can have a different name for NAT setup. Portforward.com contains more information about most router brands. 5. Please choose ‘Configure Port Redirection Table’ 6. Now we have to let the router know, on which port the camera is located. Service name: give the camera a recognizable name, i.e.
Private IP: Is the IP address of the camera. Again, you can use the IPCamera Tool to look it up Private Port: This is the same as public port Please tick the box for ‘active’ Then press ok Now go to the DDNS Status from step 3.7.2 and check if it says ‘succeed’. You should now be able to login to the camera from remote access.
Fill the service port (except 80), IP address of the camera, then click Save NOTE: The port and IP address should be the same as the Camera. BELKIN: 1. Login to the router. 2. Choose “Firewall”, select “Virtual Servers” 3. Input the port (except 80) and IP address, then click save. NOTE: The port and IP address should be the same as the Camera. Figure 7.6 DLINK: 1. Login the router. 2. Choose “Advanced”, select “Virtual Servers” 3. Input the port, IP address, Protocol, then click save.
2.7.3 Belgian Customers with Telenet Modem/Routers Our Belgian customers with Telenet Modem/Routers often do not have access to their Modem/Router because of Telenet policies. Please visit www.telenet.be and login with your personal username and password to change Wireless settings and do advanced options like portforwarding. Please contact Telenet if you need any help.
3.0 Settings 3.8 System Settings Figure 8.0 3.8.1 Device Info You can find the information about Device ID, Firmware Version, Embedded Web UI Version, Alias, Alarm Status, DDNS Status, UPnP Status and MSN status.
Figure 8.1 3.3 Alias Settings Default device name is anonymous. You set any new name for your camera here, then click Submit. Figure 8.2 3.4 Date &Time Settings Set the date and time for your camera. Choose the Clock Time zone of your country. You can choose Sync with NTP Server (Figure 8.3) or Sync with PC Time (Figure 8.4). Figure 8.3 Figure 8.
3.5 Users Settings Eight accounts are acceptable for this system. Here you can set the user names and password as Administrator, Operator or Visitor, with permission for them as below: Visitor: In this mode, you can only view. (Details 2.7). Operator: You can control the direction of IP Camera and set some parameters. (Details 2.8). Administrator: You can setup the advanced configurations of the IP Camera. (Details3.1-3.22). Figure 8.5 3.
3.7 Indicator Settings Figure 8.7 Set the pilot lamp mode, to one of the following three options: (1) Non-connected network out: Flicker while connected to the internet and turn off when disconnected. (2) Non-connected network with more slow-frequency flicker: Flicker while connect to the internet and more slower when disconnected. (3) Extinguished: Stay OFF. 3.8 Backup & Restore Figure 8.
Record User information, including weekday, date, time, user name, visitor IP address etc. MSN Settings NOTE: Set the port forwarding successfully before setting MSN (Refer to port forwarding in DDNS settings). Then go to the MSN settings page, fill in the correct user name and password, add the MSN buddy, max. up to 10 friends, after submitting, the user(s) will be shown in your MSN friend list. Click System—Device Info to check the MSN status.
3.9 Other Settings Figure 9.0 Here you can configure some additional functions such as Motion Detection, Alarm, IO Linkage, Schedule, FTP Upload, Alarm Mail Alert, Record Path, etc. 3.10 Mail Service Settings Set Mail Service Settings to enable the camera to send e-mail alerts when motion is detected. Figure 9.1 Sender: Make sure the sender mailbox server provider supports SMTP, and the mailbox should not enable SSL or TSL encryption. Receiver: Here you can set four receivers.
Figure 9.2 If it shows the following errors when you click Test. Please check whether the information you filled in is incorrect and try again. 1) Cannot connect to the server. 2) Network Error. Please try later. 3) Server Error. 4) Incorrect user or password. 5) The sender is denied by the server. Maybe the server needs to authenticate the user, please check and try again. 6) The receiver is denied by the server. Maybe because of the anti-spam privacy of the server. 7) The message is denied by the server.
Figure 9.4 FTP Server: If your FTP server is set up in LAN. You can set as Figure 9.3. If you have an FTP server that can be accessed from the Internet, you can set as Figure 9.4. FTP Port: Usually the port is 21. FTP Upload Folder: Make sure that the folder you plan to store images in exists. The camera cannot create the folder itself. Also, the folder must be erasable. FTP Mode: It supports standard (POST) mode and passive (PASV) mode. Upload Image Now: It will upload images when you selected it.
If it prompts error information as follows. 1) Cannot connect to the server. Please check FTP Server is correct. 2) Network Error. Please try later. 3) Server Error. 4) Incorrect user or password. Please check the username and password is correct. 5) Cannot access the folder. Please be sure the folder exists and your account is authorized. 6) Error in PASV mode. Please be sure the server supports PASV mode. 7) Error in PORT mode. PASV mode should be selected if the device is behind a NAT.
After you enable motion detect armed, if there is motion detected, the Alarm Status will turn to Motion Detect Alarm. (Figure 9.8). Figure 9.8 3.12.2 Motion Detect Sensitivity You can choose level 1-10; level 10 means the most sensitive, 1 means the least sensitive. Figure 9.9 3.12.
There are two options for Trigger Level. (Figure 10.1). High: When the external alarm device is close, then the alarm is triggered. Low: When the external alarm device is switching off, then the alarm is triggered. Figure 10.1 There are two options for Output Level. (Figure 10.2). High: When chosen, the IO Pins work as a switch that is closed. Low: When chosen, the IO Pins work as a switch that is switching off. Figure 10.2 3.12.4 IO Pins for IO Alarm Linkage Figure 10.
3.13 Send e-mail on Alarm When chosen, it will send picture and e-mail to your e-mail once alarmed. (First you should finish the e-mail Service Settings. Figure 9.1). NOTE: It usually will send 6 snapshots by one e-mail to your mailbox for each alarm triggered. Each alarm will last for 60 seconds. Upload Image on Alarm Enable Upload Image on Alarm to set upload images to FTP once alarmed. Upload Interval: Set the upload interval (Seconds). NOTE: The total alarm time is 60 seconds. Figure 10.
Once an alarm has occurred, there will be indication as below: 1. The corresponding status light turns Red and keeps blinking. Figure 10.7 2. If you set Sound on Alarm, you can hear a beep sound from your computer you use when alarmed. (Figure 10.6). 3. If you set Record on Alarm, the camera will record automatically for approx one minute. You can find the record file in the folder which you set. (Figure 10.9). 4. If you set Send Mail on Alarm, you will receive e-mail alarm alert once motion is detected.
Figure 11.0 NOTE: If you couldn’t set the path here in Windows 7 or Vista, please do it as below: Windows 7 or Vista’s security level is higher than Windows XP, for “Path Settings” 1. User could add the Device IP address to the IE’s ‘Trusted sites’ first. The step is: “IE browser→Tool→Internet Proper→Security→Trusted sites→Sites→Add”. 2. You can also run the IE as administrator, input the IP address of the camera manually. (Figure 11.1). Figure 11.1 3.
NOTE: Server Push Mode does not support ActiveX. Play, Stop, Record, Audio, Talk, Multi-device settings, Path settings functions are controlled by ActiveX, so if you use Safari, Firefox, Google chrome browser, it is not possible to use these options. The other functions are the same as for IE Browser. 4.0 Sign in mobile phone If you are using a mobile phone, choose Sign in mobile phone, login to the camera, you will see the main user interface as below: Figure 11.
Quickly enable/disable the alarm - Zoom in and out on the image by pinching (even when your camera doesn't support zoom) - Fullscreen by rotating the device to a landscape position - Fullscreen controls - Swipe in fullscreen view to select another camera, this only works when not zoomed in (double tap to zoom to 100%) - Take snapshots and save it to your camera roll - Adjust brightness/contrast - Mirror and flip is taken into account (so the controls will still work intuitively, even when the camera is moun
5.0 Appendix 5.1 Frequently Asked Questions Note: For most problems you might encounter, please check Network connections first. Check the working status revealed by the indicators on the network server, hub, exchange and network card. If abnormal, check the network connections. I have forgotten the administrator username and/or password. To reset the administrator username and password, press and hold down the RESET BUTTON for 15 seconds.
If you use Windows 7 or Vista, and you could not find the shortcut on desktop after installing the IP camera tool, please check if the path of the tool port to is correct. For example, was it was pointing to C:\Windows\System32\IPCamera.exe. Please fix this by pointing the shortcut to the correct path C:\Windows\SysWOW64\IPCamera.exe. After this you should be able to use the shortcut without any problems.
You can enter http://www.dyndns.com and register an account. Pop-up the prompt” Fail to connect to the device…”? This prompt only appears in the case of using multiple cameras. When you set multiple cameras, and the device status light changes to yellow cameras are connected to power and working correctly. 5.
Power Supply 5VDC/2A External Power Adapter Power Consumption 5W (Max.) Operate Temperature 0°C ~ 55°C Operate Humidity 20%-85% non-condensing Storage temperature -10°C ~ 60°C Storage Humidity 0%-90% non-condensing PC System Requirement CPU 2.0 GHZ or above Memory Size 256 MB or above Display Card 64M or above memory Supported OS Microsoft Windows 98/ME/2000/XP/Vista/7 Browser IE6.0, IE7.0, IE8.
DECLARATION OF CONFORMITY Hereby, ebode declares that this IPV68 are in compliance with the essential requirements and other relevant provisions of the following Directives: 1) Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity 2) Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States
DECLARATION OF CONFORMITY TO R&TTE DIRECTIVE 1999/5/EC for the European Community, Switzerland, Norway, Iceland and Liechtenstein Product category: general consumer (category 3). English: This equipment is in compliance with the essential requirements and other relevant provisions of the European R&TTE Directive 1999/5/EC Deutsch [German]: Dieses Gerät entspricht den grundlegenden Anforderungen und den weiteren entsprechenden Vorgaben der Richtlinie 1999/5/EU.
Also available from ebode: LightSpeaker The Next Bright Idea The unique ebode LightSpeakerTM cleverly combines low consumption LED lighting with wireless sound in one easy ‘plug and play’ system that can be hidden away in a lampshade or light fitting. Install it into any room in just a few minutes without tools or extra wiring! LightSpeakerTM can be mounted into many different light fixtures including pendants fittings, table and floor lamps.
Notes March 2013 74 IPV68
Notes March 2013 75 IPV68
www.ebodeelectronics.
