Operation Manual

31-7-2014 62 ebode IPV38P2P
When you plug in the SD card during the camera work process, please reboot the camera
again, or else the SD Card may be cannot work well.
Go to the Settings  Device Status  Device Status page, you can see the SD card
status.
Figure 6.64
The default storage path of alarm record files is SD card, when the available size of SD
card is less than 256M, the old record files will be deleted automatically.
6.7 PTZ
This page will allow you to change the pan/tilt speed and do cruise tracks settings.
6.7.1 Pan/Tilt Speed
There are five Pt speed types: very fast, fast, normal, slow and very slowly. Select the
desired PTZ speed type and click save button .
Figure 6.65
NOTE: This camera does not yet support zoom speed!