Operation Manual

31-7-2014 60 ebode IPV38P2P
Recording Location: SD card or FTP. When the camera alarmed, it will store the alarm
files to the SD card or FTP. Make sure the camera has been inserted the SD card. On this
page, you can see the available space of the SD card.
Local Recording Location: For Windows OS, the location recording path is c:/
IPCamRecord, you can change another one. For MAC OS, the manual recording path is: /
IPCamRecord.
6.6.2 Alarm Recording
This page you can change the Pre-record time and Alarm record time.
Figure 6.60
The default Pre-recorded time is 5s and the alarm record time is 30s, you can change
another time, click Save button to take effect.
6.6.3 Local Alarm Recording
This page you can enable the local alarm record and Local Alarm record time.
Figure 6.61
6.6.4 Scheduled Recording
On the page you can configure the schedule record.
When the parameter Recording Location is set SD Card on the Storage Location page,
you can configure parameters as shown in follow figure.