Operation Manual

31-7-2014 32 ebode IPV38P2P
6.2.4 Multi-Camera
If you want to view multi-surveillance screens on one window, you need to login one
camera, and set it as the main device, and do Multi-Device Settings, add other cameras
to the first one camera. Before you do multi-cams settings, you need to assign different
port such as 81, 82, 83, 84, 85, 86, 87, 88 to the cameras if there is 8 cams installed.
The firmware within the camera can support a maximum of 9 devices monitoring all at
the same time. This page you can both add MJPEG and H.264 series cameras to the first
camera and view multi-surveillance screen on one window.
Add cameras in LAN
In Multi-Device Settings page, you can see all devices searched in LAN. The 1st Device is
the default one. You can add more cameras in the list in LAN for monitoring. The
camera’s software supports up to 9 IP Cameras online simultaneously. Click The 2nd
Device and click the item in the Device List in LAN, the Alias, Host and Http Port will be
filled in the boxes below automatically. Enter the correct username and password then
click Add. Add more cameras in the same way.
Figure 6.11
Camera Model: Our Company produces two series cameras: MJPEG and H.264. Here will
show you which series the camera belongs to.
1 Click it, camera
model, alias, host and
HTTP Port will be
filled in the following
boxes automatically
2 Enter the User name and
password of the 2nd camera
3 Click Add to take effect