Datasheet

Product Data Sheet RER133-41/14/2TDP
02/02/2019 page 3 of 13
1 General
Fan type Blower without chassis with intake nozzle
Rotating direction looking at rotor Clockwise
Airflow direction Air in axially, Air out radially
Bearing system Ball bearing
Mounting position - shaft Any
2 Mechanics
2.1 General
Depth 91,0 mm
Diameter 133,0 mm
Mass 0,890 kg
Housing material
Impeller material Plastic
2.2 Connections
Electrical connection Wires
Lead wire length L = 425 mm
+- 10,0 mm
Tolerance
Tube length S = 115 mm
+- 5,0 mm
Tolerance
Wire size (AWG) 20
Insulation diameter 2,05 mm
Wire Color Operation
1 red + UB
2 blue - GND
3 violet PWM
4 white Tacho
The auxilliaries shown on the schematic diagram (which are required for the intended use) are not part of our delivery.
Litzen 1 - 2: AWG20 (Isolationsdurchmesser 2,05mm)
Litzen 3 - 4: AWG22 (Isolationsdurchmesser 1,35mm)