Datasheet

EC centrifugal module - RadiCal
backward curved, single inlet
with housing
K3G133-RA01-03
Technical features
Mass 0.9 kg
Size 133 mm
Surface of rotor Thick layer passivated
Material of electronics housing Die-cast aluminium
Material of impeller PA plastic
Housing material PA plastic
Number of blades 7
Direction of rotation Clockwise, seen on rotor
Type of protection IP 54
Insulation class "B"
Humidity class F3-1
Max. permissible ambient motor
temp. (transp./ storage)
+ 80 °C
Min. permissible ambient motor
temp. (transp./storage)
- 40 °C
Mounting position Any
Condensate discharge holes None, open rotor
Operation mode S1
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 1.1 mA
- Tach output
- Output limit
- Motor current limit
- Soft start
- Control input 0-10 VDC / PWM
- Control interface with SELV potential safely disconnected from the mains
- Overvoltage detection
- Over-temperature protected electronics / motor
- Line undervoltage detection
Touch current acc. IEC 60990
(measuring network Fig. 4, TN
system)
<= 3.5 mA
Motor protection Locked-rotor protection
Cable exit Lateral
Protection class I (if protective earth is connected by customer)
Product conforming to standard EN 60335-1; CE
Approval CCC; UL 1004-7 + 60730; C22.2 Nr.77 + CAN/CSA-E60730-1
Item no. 51160-5-9980 · ENG · Revision 85486 · Release 2015-05-18 · Page 2 / 5
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone [phone] · Fax [phone] · [e-mail] · www.ebmpapst.com