Datasheet

EC centrifugal fan
forward curved, single inlet
with housing (flange)
G3G120-BB01-06
Technical features
Mass 1.9 kg
Size 120 mm
Surface of rotor Thick layer passivated
Material of impeller Sheet steel, galvanised
Housing material Die-cast aluminium
Direction of rotation Clockwise, seen on rotor
Type of protection IP 54
Insulation class "B"
Humidity (F)/environmental
protection class (H)
H0 - dry environment
Max. permissible ambient motor
temp. (transp./ storage)
+ 80 °C
Min. permissible ambient motor
temp. (transp./storage)
- 40 °C
Mounting position Any
Condensate discharge holes None, open rotor
Operation mode S1
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 10 mA
- Tach output
- Output limit
- Motor current limit
- Soft start
- Control input 0-10 VDC / PWM
- Control interface with SELV potential safely disconnected from the mains
- Overvoltage detection
- Over-temperature protected electronics / motor
- Line undervoltage detection
EMC interference immunity Acc. to EN 61000-6-2 (industrial environment)
EMC harmonics Acc. to EN 61000-3-2/3
EMC interference emission Acc. to EN 61000-6-3 (household environment)
Touch current acc. IEC 60990
(measuring network Fig. 4, TN
system)
<= 3.5 mA
Motor protection Locked-rotor protection
Cable exit Variable
Protection class I (if protective earth is connected by customer)
Product conforming to standard EN 60335-1; CE
Approval C22.2 Nr.77 + CAN/CSA-E60730-1; EAC; UL 1004-7 + 60730
Item no. 55004-5-9980 · ENG · Revision 85329 · Release 2017-03-16 · Page 2 / 5
ebm-papst Mulfingen GmbH & Co. KG · Bachmühle 2 · D-74673 Mulfingen · Phone [phone] · Fax [phone] · [e-mail] · www.ebmpapst.com