Datasheet

AC axial compact fan
AC 3200 JH
Technical features
General description Particular design features:
Can be used universally for all supply voltages between 85 and 265 VAC.
Fan speed independent of the power frequency.
Significantly reduced power consumption compared to conventional AC fans.
Open loop speed control, sensor and alarm signal available on request.
Rigid compression curve for high air flow at high counterpressure.
Innovative impeller with winglets for low noise.
General features:
Material: fibreglass-reinforced plastic. Impeller made of PA, housing PBTP.
Electronic commutation completely integrated. Protected against locking.
Connection via single strands AWG 22, TR 64, bared and tin-plated.
Air exhaust over bars. Rotational direction clockwise looking at rotor.
Mass: 325 g.
Mass 0.325 kg
Dimensions 92 x 92 x 38 mm
Material of impeller Fiberglass-reinforced PA plastic
Housing material Fiberglass-reinforced PBTP plastic
Direction of air flow Air exhaust over bars
Direction of rotation Right, looking at rotor
Type of protection IP 20
Bearing Ball bearings
Lifetime L10 at 40 °C 70000 h
Lifetime L10 at maximum
temperature
35000 h
Connection line Single strands AWG 22, TR 64, bared and tin-plated.
Motor protection Protected against blocking.
Approval VDE, CSA, UL, CCC, CE
Web data sheet D · Page 2 of 4
ebm-papst St. Georgen GmbH & Co. KG · Hermann-Papst-Straße 1 · D-78112 St. Georgen · Phone [phone] · Fax [phone] · [e-mail] · www.ebmpapst.com