Product Data Sheet 6318HU Product Data Sheet 6318HU The engineer's choice
Product Data Sheet 6318HU 6318HU INDEX 1 General ............................................................................................................................................................... 3 2 Mechanics .......................................................................................................................................................... 3 2.1 2.2 3 Operating Data ....................................................................................................
Product Data Sheet 6318HU 1 General Fan type Rotating direction looking at rotor Airflow direction Bearing system Mounting position - shaft 2 Mechanics 2.1 General Depth Diameter Mass Housing material Impeller material Max. torque when mounted across both mounting flanges Screw size 2.
Product Data Sheet 6318HU Wire 1 2 Color red blue Operation + UB - GND Wire size AWG 22 AWG 22 Insulation diameter 1,7 mm 1,7 mm The auxilliaries shown on the schematic diagram (which are required for the intended use) are not part of our delivery.
Product Data Sheet 6318HU 3 Operating Data 3.1 Electrical Operating Data Measurement conditions: ∆p = 0: I: Features Voltage range Nominal voltage Power consumption Normal air density = 1,2 kg/m3; Temperature 23°C +/ - 3°C; Motor axis horizontal; warm-up time before measuring 5 minutes (unless otherwise specified). In the intake and outlet area should not be any solid obstruction within 0,5 m. corresp. to free air flow (see chapter aerodynamics) corresp. to arithm.
Product Data Sheet 6318HU Start-up current @ 48 V (I = 500mA/div ; t = 2s/div) 02/01/2019 page 6 of 15
Product Data Sheet 6318HU Running current @ 48 V (I = 500mA/div ; t = 2ms/div) 02/01/2019 page 7 of 15
Product Data Sheet 6318HU Locked rotor current @ 48 V (I = 500mA/div ; t = 500ms/div) 02/01/2019 page 8 of 15
Product Data Sheet 6318HU 02/01/2019 page 9 of 15
Product Data Sheet 6318HU Locked rotor current @ 36 V (I = 500mA/div ; t = 500ms/div) Locked rotor current @ 60 V (I = 500mA/div ; t = 500ms/div) 02/01/2019 page 10 of 15
Product Data Sheet 6318HU 02/01/2019 page 11 of 15
Product Data Sheet 6318HU 3.3 Aerodynamics Measurement conditions: Measured with a double chamber intake rig acc. to DIN EN ISO 5801. Normal air density = 1,2 kg/m3; Temperature 23°C +/ - 3°C; In the intake and outlet area should not be any solid obstruction within 0,5 m. Motor shaft horizontal. The information is only valid under the specified test conditions and may be changed by the installation conditions.
Product Data Sheet 6318HU 3.4 Sound Data Measurement conditions: Sound pressure level: 1 meter distance between microphone and the air intake. Sound power level: Acc. to DIN 45635 part 38 (ISO 10302) Measured in a semianchoic chamber with a background noise level of Lp(A) < 5 dB(A) For further measurement conditions see chapter aerodynamics. a.) Operation condition: 5.
Product Data Sheet 6318HU 5 Safety 5.1 Electrical Safety Dielectric strength DIN EN 60950 (VDE 0805) and DIN EN 60335 (VDE 0700) A.) Type test Measuring conditions: After 48h of storage at 95% R.H. and 25°C. No arcing or breakdown is allowed! All connections together to ground. B.) Routine test Measuring conditions: At indoor climate. No arcing or breakdown is allowed! All connections together to ground. Isolation resistance Measuring conditions: After 48h of storage at 95% R.H.
