Operation Manual
Table Of Contents
- 1 Introduction
- 2 Overview
- 3 Operation and setting/adjustment
- Notes on operation and setting
- Factory setting
- Main menu
- Start display after switching on
- Displays for activated menu items
- Heating immediately with Longpress (without settings)
- HEATING OFF with Longpress
- HEATING ON with Shortpress and with settings
- HEATING Off with Shortpress
- Change the temperature setpoint and / or the operating time during operation
- Set VENTILATION ON with Shortpress and if applicable set the operating time
- VENTILATION OFF with Longpress
- VENTILATION OFF with Shortpress
- ADD-ON UNIT ON – e.g. activate the HEATING function for a 2nd heater
- ADD-ON UNIT ON – e.g. activate the VENTILATION function for a 2nd heater
- ADD-ON UNIT OFF with Longpress
- ADD-ON UNIT OFF with Shortpress
- General information on programming the preset time
- Program preset times
- EasyStart Timer settings
- Settings
- 4 What to do if …?
- 5 Service
26 | VEHICLE HEATERS – TECHNICAL DOCUMENTATION
3 OPERATION AND SETTING/ADJUSTMENT
SETTINGS
SETTING THE TIME
Display ON, the Start display appears.
Use the
or button to select the symbol
in the Menu bar.
10:30
Mo.
Confirm the SETTINGS menu item by pressing the
button.
Confirm the SET THE TIME by pressing the but-
ton.
Use the
or button to set the hours.
06 : 00
Press the button to confirm the setting.
Use the
or button to set the minutes.
06 : 30
Press the button to confirm the setting.
PLEASE NOTE!
Do not press the
button, as otherwise SET THE
TIME appears in the display again.
After making the setting, press the
button to
return to the SETTINGS menu item or wail until
if the vehicle lighting is ON the SETTINGS menu
item is displayed,
if the vehicle lighting is OFF the display lighting
goes out.