Operation Manual
Table Of Contents
- 1 Introduction
- 2 Overview
- 3 Operation and setting/adjustment
- Notes on operation and setting
- Factory setting
- Main menu
- Start display after switching on
- Displays for activated menu items
- Heating immediately with Longpress (without settings)
- HEATING OFF with Longpress
- HEATING ON with Shortpress and with settings
- HEATING Off with Shortpress
- Change the temperature setpoint and / or the operating time during operation
- Set VENTILATION ON with Shortpress and if applicable set the operating time
- VENTILATION OFF with Longpress
- VENTILATION OFF with Shortpress
- ADD-ON UNIT ON – e.g. activate the HEATING function for a 2nd heater
- ADD-ON UNIT ON – e.g. activate the VENTILATION function for a 2nd heater
- ADD-ON UNIT OFF with Longpress
- ADD-ON UNIT OFF with Shortpress
- General information on programming the preset time
- Program preset times
- EasyStart Timer settings
- Settings
- 4 What to do if …?
- 5 Service
VEHICLE HEATERS – TECHNICAL DOCUMENTATION | 25
DEACTIVATING THE PROGRAM MEMORY
Use the
or button to select the “Off” setting.
2
Off
On
Press the button to confirm the “Off” setting.
PLEASE NOTE!
The settings remain saved.
After editing the program, press the
button to
return to the PROGRAM / PRESELECTION menu item
or wail until
if the vehicle lighting is ON the PROGRAM / PRESE-
LECTION menu item is displayed,
if the vehicle lighting is OFF the display lighting
goes out.
Do not press the
button, as otherwise the “On”
setting switches to “Off” and vice versa.
EDIT THE PROGRAM MEMORY AGAIN
Use the
or button to select the symbol.
2
Off
On
Use the button to confirm the setting and con-
tinue as described on page 23, 24 and 25.
3 OPERATION AND SETTING/ADJUSTMENT
ACTIVATING THE PROGRAM MEMORY
2
Off
On
Press the button to confirm the “On” setting.
2
Mi. 21 °C
06 : 30 60 min.
PLEASE NOTE!
After editing the program, press the
button to
return to the PROGRAM / PRESELECTION menu item
or wail until
if the vehicle lighting is ON the PROGRAM / PRESE-
LECTION menu item is displayed,
if the vehicle lighting is OFF the display lighting
goes out.
Do not press the
button, as otherwise the “On”
setting switches to “Off” and vice versa.