Operation Manual
Table Of Contents
- 1 Introduction
- 2 Overview
- 3 Operation and setting/adjustment
- Notes on operation and setting
- Factory setting
- Main menu
- Start display after switching on
- Displays for activated menu items
- Heating immediately with Longpress (without settings)
- HEATING OFF with Longpress
- HEATING ON with Shortpress and with settings
- HEATING Off with Shortpress
- Change the temperature setpoint and / or the operating time during operation
- Set VENTILATION ON with Shortpress and if applicable set the operating time
- VENTILATION OFF with Longpress
- VENTILATION OFF with Shortpress
- ADD-ON UNIT ON – e.g. activate the HEATING function for a 2nd heater
- ADD-ON UNIT ON – e.g. activate the VENTILATION function for a 2nd heater
- ADD-ON UNIT OFF with Longpress
- ADD-ON UNIT OFF with Shortpress
- General information on programming the preset time
- Program preset times
- EasyStart Timer settings
- Settings
- 4 What to do if …?
- 5 Service
2 | VEHICLE HEATERS – TECHNICAL DOCUMENTATION
CONTENTS
CHAPTER CHAPTER TITLE
CHAPTER CONTENTS PAGE
1 INTRODUCTION
Please read first 4
Safety information 4
Range of uses 4
General information 4
EU Declaration of conformity 4
2 OVERVIEW
EasyStart Timer 5
Button functions 5
Longpress button 5
Shortpress button 5
Longpress button 5
Shortpress button 5
Press
button 1x / keep pressed 5
Press
button 1x / keep pressed 5
3 OPERATION AND SETTING/ADJUSTMENT
Notes on operation and setting 6
Factory setting 7
Main menu 8
Start display after switching on 9
Displays for activated menu items 9
Heating immediately with Longpress (without settings) 10
HEATING OFF with Longpress 10
HEATING ON with Shortpress and with settings 11