Important! &WARNINGS Read carefully, keep for future reference Before assembling, check whether all parts listed in the part list have been delivered. Do not start assembling if parts are missing or damaged. Before assembling, make sure there is on enough flat space for the procedure. Keep children staying away from the assembly zone. Follow each step of the assembly instructions. The product is designed for indoor use only. For your safety, please do not jump or horseplay on the bed.
CEREBRA wnt ee & Check all the components & hardware before assembly. Step 1 Conner headboard bar ¢b to Headboard Tube £ and frame @ with Do not install in case any part missing. parts G and bolt £3.
CICERO Step 2 Attach, @ to headboard bar with bolt and mat ©. Step 3 Connect foot board bar to footbridge tube © with bolt.
Step 4 Attach side rail to foot board, 7/4 CECA par io CEREBRA Step 5 Insert side rail G into®, @ into®, support with side rail support bar &. Fix the side rail with bolt®and mul® on both sides.
Step © (1) Insert plastic cap into both end of each slats ©. (23 Completely insert slat ends into the slots of both side rails. Remark: Position for slats ©: in the middle x2, closed to headboard x1, closed to foot board iris cop 4 Slot closed ; Tap headboard Fi NE to foot board 9/14 CLE CICERO Step 7 Put support frame © x2 under the slats © and keep them straight. Fix the slats and frames with bolts 3.
Step 8 (1) Insert plastic caps into both end of all slats &. Step © Lock both end of slats © with bolt @. {2} Completely insert both end of all salts into slots of side rails. \V4 WY Before 12/14 III 11/14 2IDDI33DD
