Important! WARNINGS Read carefully, keep for future reference Before assembling, check whether all parts listed in the part list have been delivered. Do not start assembling if parts are missing or damaged. Before assembling, make sure there is on enough flat space for the procedure. Keep children staying away from the assembly zone. Follow each step of the assembly instructions. The product is designed for indoor use only. For your safety, please do not jump or horseplay on the bed.
CEREBRA wnt ee & Chock all the components & hardware before assembly. Step 1 Conner headboard bar gb to Headboard Tube € and frame & with Do not install in case any part missing. parts @ and bolt £3.
SERRANO Step 2 Hatch, © to headboard bar with bolt Grand mat £3.
Step 4 Attach side rail to foot board, 7/4 CECA par io CEREBRA Step 5 Insert side rail G into®, @ into®, support with side rail support ber &. Fix the side rail with bolt®and mul on both sides.
CICERO Step © (1) Invert plastic cap@) into both end of each slats ©. Step 7 Put support frame © %4 under the slats © and keep them straight. (23 Completely insert slat ends into the slots of both side rails. Fix the slats and frames with bolts 3.
Step 8 (1) Insert plastic caps into both end of all slats &. Step © Lock both end of slats © with bolt @. ass G pom B | onset {2} Completely insert both end of all salts into slots of side rails.
