ASSEMBLY INSTRUCTIONS Chair
Should you prefer to speak with a customer service representative 2
Guidelines FAILURE TO FOLLOW THESE WARNINGS WHEN IN USE COULD RESULT IN INJURY • Do not stand on the item or use as a step ladder • Do not use this item unless all bolts and screws are firmly secured and fastened. • Check all bolts and screws every 90 days. As necessary tighten if any are loose. • Lift up then move. Pushing over or dragging this product can result in an injury or cause damage to the floor and piece.
Pre-Assembly Preparation: Please read through this instruction booklet before beginning assembly of this item. Two adults are recommended for assembly. • Clear out the space for assembly and lay out all parts on Parts List, extra room will allow you to easily determine if all the pieces are present. • Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts or hardware. • Keep small parts and pieces away from children and pets until fully assembled.
Parts List Seat Frame (1) Back Cushion (1) Thumb Bolts (1) Wood Legs with Washers (4) 5
Step 1-- 1.Ensure all parts have been removed from the carton and place on a protected surface or carpet. 2.Check all parts and hardware are the same as the “Parts List”. 3.Slide the Back Cushion (B) into the Seat Frame (A) & align the bracket on the Seat Frame (A) until fully engaged.
Step 2-- Insert thumb bolts (C) into holes where on the middle of Seat Frame (A) and tighten the bolts to Back Cushion (B) 7
Step 3-- 8 Remove the plastic caps on the threaded boles of each Wood Legs (D). Attach the Wood Legs with Washers (D) to the corners of the chair.
Step 4-- Place the chair onto a flat level surface and level the seat frame, adjust the Legs to make sure the chair is level.
33" 30 " 17 1/2" 23" Product Dimension 10
Limited Warranty 11
