Assembly Instructions 2 people This instruction booklet contains important safety information, please read and keep for future reference. 60mins 1 YR LTD 2 DOOR WARDROBE WITH MIRROR 1 Box BACK VIEW FRONT VIEW Product Dimensions: Height 72” x Width 32” x Depth 17” Weight Capacity Per Drawer 20 lbs.
FOR PROMPT, RELIABLE SERVICE PLEASE HAVE YOUR INSTRUCTION MANUAL READY DO NOT RETURN PRODUCT TO THE STORE If parts are missing or damaged please contact our customer service team and we will gladly ship your replacement parts FREE of charge within ONE YEAR of purchase! ______________________________________________ WARRANTY warrants this product to be free from defects in materials and workmanship and agrees to remedy any such defect. This warranty covers one year from the date of original purchase.
Let’s get started… Helpful hints, read before beginning assembly • • • • • Make sure you receive all boxes. If your item is packed in one box, box count will read 1 of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second box will read 2 of 2. Read each step carefully. It is very important that each step is performed in the correct order. If these steps are not followed in sequence, assembly difficulties will occur.
Hardware List A PVC Dowel D QTY 27Pcs B 48Pcs E Screw M3.5x16mm G 1Pc 12Pcs F H Hinges 2/8 K V – Bracket Screw M4x45mm QTY 24Pcs 40Pcs Nail 6Pcs I 2Pcs L Handle (96mm) 4Pcs M C Screw M3.5x21mm Aluminum Pipe (760x19mm) J Minifix QTY 6Sets Drawer Slide – A (350mm) 4Pcs 22Pcs Sticker 4Pcs L - Leg Important 1. Before you throw the package, please use the Check Box to identify the parts and hardware to ensure that you have everything you need. 2.
Parts List 1Top Panel 800x425x15mm 4 Kick Panels 766x70x15mm 7 Kick Panel 766x100x15mm 10 Drawer Front 780x238x15mm 13 Drawer End 709x128x15mm 16 Back Panel 1770x396.5x2.5mm QTY 1Pc 2 Right Side Panel 1Pc 5 Back Strengthening 1Pc 8 Partition Panel 2Pcs 11 Drawer Side Panel 2Pcs 14 Drawer Base 2Pcs 17 Door Panel 1800x400x15mm 766x70x15mm 766x400x15mm 350x128x15mm 718x344x2.
The Breakdown… 1 3 16 16 4 2 5 17 9 8 6 10 10 6|Page
Step 1 • Insert PVC dowel (A) to panel 2, 3, 4, 5, 6, 7, 8, 11 and 12's into the holes as shown, using hammer to gently tap them in.
Step 2 Place the drawer slide (I) at the predrilled holes on the panel 2 and 3 as shown. Then fasten with 3 (D) screws. D 3 Fasten V-Bracket (K) on panel 2 and 3 as shown by using 2 (D) screws. 2 Place the drawer slide (I) at the panel 2 and 3 as shown. Then fasten the drawer slide(I) with 2 (D) screws.
Step 3 • Place and fix panel 4, 5, 6, 7, 8 onto panel 2 by inserting the (Left) dowels onto the non-thru holes at panel 2 by slightly tapping them with hammer. • Insert and fasten screws (C) (Using predrilled holes on Panel 2) into the panel 4, 5, 6, 7, and 8.
Step 4 o Fix panel 3 onto panels 4, 5, 6, 7 and 8 by inserting the dowels onto non-thru holes on panel 3 by slightly tapping them with hammer. o Fasten screws (C) from outside of panel 3, using the predrilled holes to attach panels 4, 5, 6, 7 and 8. o Place the L Leg (M) on the two sides of panel 2 and panel 3 using 2 (D) screws. 4 3 7 8 5 6 *Using tighten 5 screws (C) from the thru holes of panel 3.
Step 5 • Fix panel 1 onto panel 2 and 3 and align properly by inserting the 5 dowels on panel 2, 3 & 4 onto the non-thru holes of panel 1. • Gently tap panel 1 on panels 2, 3 & 4 dowels. • Fasten 4 screws (C) on panel 1 to attach panels 2 & 3.
Step 6 • Fix 40 x Nails (F) onto Panel (16) using a Hammer. • Cover all the (C) screws heads with sticker (M).
Step 7 • Insert 4 (J) hinges onto panel 9 and 17's predrilled holes, then fasten screws (D) into hinges (J). 1. Panels 9 and 17 doors can be used for both right side and left side. 17 9 2. Fasten 2 (E) screws from inner side of door panel 9 into the handle (H) holes. L 3. Cover all (E) screw heads with (L) sticker.
Step 8 1. Insert the mini fix (B) in panel 10. 10 2. Insert panel 11, 12, 15 onto panel 10 by gently hammering the dowels in. 3. Insert panel 14 into the drawer and align properly. 4. Insert the mini fix (B) (nuts) with the screw head facing upward and attach to panels 11, 12 and 14 's top thru holes.
• Fasten screw (C) on panels 11 and 12 to attach to panel 13. 1. Flip the drawer over fasten 2 (E) screw from inside panel 10 into the handle (G). 2. Cover all (E) screw heads with (L) sticker.
Step 9 Almost there • Place hanger (G) onto panel 2 and 3's V-bracket. 1.Fasten screw (D) on (J) hinges. 2.You can align and adjust the door panels by tightening and loosening the screw.
Step 10 • Insert drawers into wardrobe. Place the rollers at the end of the drawer on top of the rollers in the wardrobe, and gently slide in.
| P a g e
Job Complete… 17 9 10 10 19 | P a g e
