Installation & Assembly

ManualsBrandsEbern Designs ManualsFurnitureChloe Kitchen Island with Stainless Steel Top

Kitchen C

art

Summary of content (8 pages)

PAGE 1
Kitchen Cart
PAGE 2
Top Panel Left Frame Right Frame Bottom Panel Back Rail 1 PC 1 PC 1 PC 1 PC 1 PC Partition Panel Drawer Front Panel Drawer Left Panel 2 PCS 2 PCS Front Rail Shelf Frame 1 PC 1 PC 1 PC Drawer Right Panel Drawer Back Panel Drawer Bottom Panel 2 PCS 2 PCS 2 PCS
PAGE 3
Screw 2 PCS 2 PCS 1 PC 2 PCS ADDITIONAL TOOLS (Not Provided) Note: It is not recommended to use power tools during assembly . Phillips Head Screwdriver Note: Wood dowels are intended for alignment. Additional clearance between wood dowel and pre-drilled hole is intentional for ease of assembly.
PAGE 4
Please do not use tools to assemble this unit unless specifically indicated. Step 1. Insert drawer left panel (part J) and drawer right panel (part K) into drawer front panel (part I) pull down to lock. Slide drawer bottom panel (part M) into grooves of assembled unit (parts I, J & K). Attach drawer back panel (part L) to assembled unit (parts J, K & M) using screws (part #3) and phillips head screwdriver. Repeat for remaining drawer.
PAGE 5
Step 2. Attach shelf frame (part G) to left frame (part B) using short bolts (part #2), barrel nuts (part #4), allen wrench (part #8) and phillips head screwdriver. Step 3. Attach bottom panel (part D) to left frame (part B) using short bolts (part #2), barrel nuts (part #4), allen wrench (part #8) and phillips head screwdriver.
PAGE 6
Step 4. Insert back rail (part E) into left frame (part B) and right frame (part C) and lock the hardware. Attach shelf frame (part G) and bottom panel (part D) to right frame (part C) using short bolts (part #2), barrel nuts (part #4), allen wrench (part #8) and phillips head screwdriver. Step 5. Carefully turn unit upright. Attach front rail (part F) to frames (parts B & C) using long bolts (part #1), barrel nuts (part #4), allen wrench (part #8) and phillips head screwdriver.
PAGE 7
Step 6. Attach partition panel (part H) to rails (parts E & F) using wood dowels (part #5), screw (part #3) ,phillips head screwdriver and lock the hardware. Step 7. Carefully lay down unit on a flat, soft surface, such as carpet. Attach locking casters (part #6) and casters (part #7) to frames (parts B & C) using wrench (part #9).
PAGE 8
Step 8. Carefully turn unit upright. Attach top panel (part A) to assembled unit (parts B, C & H) and lock the hardware. Step 9. Slide assembled drawers into place.