Owner Manual

Attach an angle iron (D) to 1/4 table (C) with M6 X 12
bolt (EE). Repeat procedure to complete the assembly of
the rest of three 1/4 tables.
3. Line up holes in 1/4 table with corresponding holes
the other 1/4 table, insert two M6 X 12 bolts (EE) through
holes, finger tighten two M6 nuts (DD) . Be sure that line
① and line ② are on the same level and fully tighten
bolts. Use another two M6 X 12 bolts to fasten the two
1/4 tables. Repeat procedure to complete the assembly of
the rest of 1/4 tables.
M4 X 25 screw
x 1
x 4
M6 X 12 bolt
2
1
Hardware Used
EE
x 12
M6 X 12 bolt
DD
x 8
M6 nut
L
A
D
C
7
ASSEMBLY INSTRUCTIONS
Hardware Used
AA
Hardware Used
EE
1
3
1. Screw the knob ( A ) on the door panel (L) with M4 X 25
screw (AA).
2.
HH
x 1
Philips screwdriver
2