Owner Manual

6
ASSEMBLY INSTRUCTIONS
Hardware Used
AA
BB
Hardware Used
CC
1
2
3
1. Attached door handle to one door with two Φ4 nuts
and two M4 X 8 screws. Repeat procedure to complete
the assembly of the other door.
2. Attach angle iron to 1/4 table with two M6 X 12
bolts. Repeat procedure to complete the assembly of
the rest of three 1/4 tables.
3. Line up holes in 1/4 table with corresponding holes
the other 1/4 table, insert two M6 X 12 bolts through
holes, finger tighten two M8 nuts. Be sure that line
and line are in the same level and fully tighten bolts.
Use another two M6 X 12 bolts to fasten the two 1/4
tables. Repeat procedure to complete the assembly of
the rest of 1/4 tables.
x 4
Screw M4 X 8
Nut Φ4
x 4
x 8
Bolt M6 X 12
2
1
Hardware Used
CC
x 16
Bolt M6 X 12
DD
x 8
Nut M6