Owner Manual
OPERATION
OPERATION
Lighti
ng instructions
WARNING
1. Press and hold
electronic igniter
WARNING
FOR YOUR SAFETY:
1. Press and hold
electronic igniter
button.
FOR YOUR SAFETY:
Keep face and
body away from
burner area whe
n lighting.
button.
2. Turn
the burner control to the high
Keep face and
body away from
burner area whe
n lighting.
Ensure burner cont
rols are in the
2. Turn
the burner control to the high
position, press
and hold in. When
Ensure burner cont
rols are in the
off posit
ion. Slowly turn on the
gas supply valve.
position, press
and hold in. When
the burner
lights, release the
electronic ignite
r button.
gas supply valve.
electronic ignite
r button.
3. Continue
to depress the burner
WARNING
3. Continue
to depress the burner
control
knob for 30 seconds and
WARNING
FOR YOUR SAFETY:
control
knob for 30 seconds and
then release
. If the flame goes
FOR YOUR SAFETY:
The propane cylinder is equipped
with an excess
flow device.
then release
. If the flame goes
out, repe
at the procedure.
with an excess
flow device.
Unless burners are
turned off
4. Adjust
the flame to the desired
height with
the burner control
Unless burners are
turned off
prior to turnin
g the cylinder on,
only small flames
and low heat
height with
the burner control
knob.
only small flames
and low heat
will be achieva
ble.
knob.
5. If the burner will not light with the
WARNING
5. If the burner will not light with the
electronic ignite
r, hold a lit long
WARNING
FOR YOUR SAFETY:
electronic ignite
r, hold a lit long
match or lit long
butane lighter to
the ignition area of the burner and
FOR YOUR SAFETY:
If the burner doe
s not light within
the ignition area of the burner and
continue with step 2.
If the burner doe
s not light within
10 secon
ds, turn the valve off and
wait 5 minutes for any gas to
continue with step 2.
6. To shut
down the burner turn the
wait 5 minutes for any gas to
dissipat
e before repeating the
procedure.
6. To shut
down the burner turn the
burner
control knob clockwise to
procedure.
burner
control knob clockwise to
the off position. Then turn the gas
off at the source (propane
off at the source (propane
cylinder valve or nat
ural gas
cylinder valve or nat
ural gas
supply valve).
13
13