Owner Manual

10 |
C. GAS CONNECTION (CONTINUED)
Incoming gas line should be piped to the 1/2” connection on the manual shutoff valve.
A small amount of air will be in the gas supply lines. When rst lighting appliance it will take a short time for air to purge from lines.
Subsequent lighting of the unit will not require such purging.
DANGER
NOTICE
CAUTION
WARNING
FIRE RISK
EXPLOSION RISK
• Gas build-up during line purge may ignite.
• Purge should be performed by qualied technician.
• Ensure adequate ventilation.
• Ensure there are no ignition sources such as sparks or open ames.
DANGER
NOTICE
CAUTION
WARNING
CHECK FOR GAS LEAKS
FIRE RISK
EXPLOSION RISK
ASPHYXIATION RISK
• Check all ttings and connections.
• Do not use open ame.
• After the gas line installation is complete, all connections must be tightened and checked for leaks with a commercially
available leak-sheck solution. Be sure to rinse off all leak check solution. Be sure to rinse off all leak check solution
following testing.
Fittings and connections may have loosened during shipping and handling.
4 GAS HOOK-UP AND INFORMATION (CONTINUED)