Owner Manual
16 |
Although the frequency of appliance servicing and maintenance will depend on use and the type of installation, a qualied service
technician should perform an appliance check-up annual. Storage of an appliance indoors is permissible only if the cylinder is
disconnected and removed from the appliance.
The use of a vinyl table cover is highly recommended to keep your table and burner looking new and ensuring extended
trouble-free operation.
INSPECT MAINTENANCE TASKS
Burner Assembly
1
Remove decorative glass and examine burner. Vacuum and wipe out as needed. Use caution
when cleaning these areas.
2 Inspect for warping and corrosion. Repair as necessary.
3
Check the hose connecting the LP gas cylinder to ensure it is not damaged. Replace as
necessary.
4 Verify air shutter area is clean.
Burner Ignition
and Operation
1 Verify all gas connections are tight and leak-free.
2
Clean burner top, inspect for plugged ports, corrosion, or deterioration. Replace burner if
necessary.
3 Inspect for ame problems.
4 Verify air shutter is clear of dust and debris and is in correct position for the gas type being used.
5 Inspect orice for soot, dirt, or corrosion.
6 Verify manifold and inlet pressures. Adjust regulator as required.
Gas Hose and Regulator 1
The gas hose with regulator supplied with appliance must be used for LP installations. The
replacement bust be those specied by the appliance manufacturer.
DANGER
NOTICE
CAUTION
WARNING
RISK OF INJURY OR PROPERTY DAMAGE. BEFORE SERVICING:
• Turn off utilities to appliance.
• Ensure appliance is completely cooled.
DANGER
NOTICE
CAUTION
WARNING
ANNUAL INSPECTION BY QUALIFIED TECHNICIAN RECOMMENDED.
CHECK:
• Obstructions of combustion and ventilation air.
• Condition of burner assembly.
• Burner ignition and operation.
• Burner air shutter adjustment.
• Gas connections and ttings.
RISK OF:
• Fire.
• Delayed ignition
or explosion.
• Exposure to combution fumes.
• Odors.
7 SERVICE AND MAINTENANCE