Use & Care Guide

 Once the replace is completely cooled down, remove the mesh cover using the handle. Pour the ashes from the bowl and

rinse with clean water and allow to dry completely.

 Clean after each use.

 Do not use a scrub brush.

 If the paint chips, use only high-temperature paints and a brush to x.

 If rust is showing, sand lightly and repaint the area with high-temperature paints.

 Dry with a soft cloth.

 Turn the unit upside down when not in use to prevent water from collecting.

 Cover the unit when not in use to prolong the life.

 Keep your re pit out of the rain.

 Use the hook (G) to lift the handle (A) on the mesh cover (B)

and carefully add wood while the re is burning.

 Use the hook (G) to carefully replace the mesh cover (B) back

onto the bowl (D).

 Place three to four sheets of crumpled newspaper on top of

the re log grate.

 Pile nely-split dry rewood on top of the loosely crumpled

newspaper. Do not use charcoal or an articial log.

 Carefully light the loosely crumpled newspaper underneath

the rewood and carefully replace the mesh cover using the

hook (G).