Use & Care Guide

 Attache the cover handle (A) to the mesh cover (B) by

inserting the cover handle (A) through the top of the

mesh cover (B) and securing with a nut (BB).

 Tighten the nut with a wrench (not included).

 Carefully place the assembled mesh cover (B) on the

bowl (D).

The re bowl is ready for use.

 Place the stand ring (E) on a soft, at surface and align

the bolt holes on the legs (F) with the holes on the stand

ring (E).

 Loosely secure the legs (F) to the stand ring (E) with

bolts (AA).

 Carefully turn the stand assembly to the upright position

and place the bowl (D) into the stand.

 Place the log grate (C) into the bowl (D).