Assembly Instructions

Ex1

Hx1

Ix4

6.5*15*1.5mm Washer

1 Unit

4 Units

1 Unit

M6 Allen Key

M6x30mm Screw

Floor Protector

4 Units

9 Units

M6x25mm Screw M6x10mm Screw

Crossed Metal

Semi-Assembled Legs

1 Unit

Step 1: Attach two Semi-Assembled Legs(B,C), using one M6x10mm Screw(E) and one

6.5*15*1.5mm Washer(H) as shown.Tighten with M6 Allen Key(J).

Step 2: Attach two Semi-Assembled Legs(B,C) to Chair Back(A), using four M6x25mm

Screws(F) and four 6.5*15*1.5mm Washer(H) as shown.Tighten with M6 Allen Key(J).

Step 3:

Attach Crossed Metal (D) to Semi-Assembled Legs(B,C) , using four M6x30mm Screws

(G) and four 6.5*15*1.5mm Washer(H) as shown.Tighten with M6 Allen Key(J).

Step 4: Tear off the backing of the Floor Protector(I) firstly and paste the four Floor Protector(I)

on the Semi-Assembled Legs(B,C) as shown.

275

Hx4

Fx4

Fabric Dining Chair 2PK

PAGE 1
Fabric Dining Chair 2PK Semi-Assembled Legs Step 1: Attach two Semi-Assembled Legs(B,C), using one M6x10mm Screw(E) and one 6.5*15*1.5mm Washer(H) as shown.Tighten with M6 Allen Key(J). Step 2: Attach two Semi-Assembled Legs(B,C) to Chair Back(A), using four M6x25mm Screws(F) and four 6.5*15*1.5mm Washer(H) as shown.Tighten with M6 Allen Key(J). Semi-Assembled Legs 1 Unit M6x10mm Screw 1 Unit Step 3: Attach Crossed Metal (D) to Semi-Assembled Legs(B,C) , using four M6x30mm Screws (G) and four 6.5*15*1.