Table Label Description QTY A Table Body 1 B Table Leg 1 C Table Leg with wheels 1 Description QTY ① Allen Key 1 ② Bolt (M6*15mm) 5 ③ Bolt (M6*35mm) 5 ④ Washer 10 Label Picture Picture Page 1 OF 5
Before Beginning Assembly: OVERVIEW Table Body(A) Table Leg(B) Table Leg with wheels(C) FRONT FACING This Table has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions here below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface.
Step 2 Place the Table Top(A) facedown as pictured above. Align Table Leg(B) to Table Body(A) and attach using Bolts(②), Bolts(③) and Washers(④) with Allen Key(①) as shown in the picture. Tighten the Bolts fully in a sequential manner. Step 3 Align Table Leg with Wheels(C) to Table Body(A) and attach using Bolts(②), Bolts(③) and Washers(④) with Allen Key(①) as shown in the picture. Tighten the Bolts fully in a sequential manner.
Step 4 Carefully stand the Table up with assistance from your adult partner. Your Table is now ready for use. This Table can only be used on a flat, level surface. To open the Table Top: Fold the Table Tops up. Rotate the Table Top 90 degress and then secure the clips under the Table Tops to the Metal Bars on the Table Base. Attention: After the Table Top is rotated 90 degrees ensure the clips under the Table Tops are fully secured to the Metal Bars on the Table Base.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
