Assembly Instructions

2
Carefully remove and identify all the parts from their protective packaging and lay them
out in front of you.
INCLUDED PARTS:
2
Carefully remove and identify all the parts from their protective packaging and lay
them out in front of you.
INCLUDED PARTS:
the solar panel to your Solar Security Light
by plugging the 15 foot cord into the cord
attached to the front of the Solar Security
Light. Turn and twist the cords while pressing
Adjustment dials are located on the underside of the motion sensor. Move the
motion sensor to allow for easier access to the controls. Move sensor back into
position upon completion.
Once you have identified all parts, connect the solar panel to your Solar Security Light by
plugging the 15 foot cord into the cord attached to
the front of the Solar Security Light. Turn and twist
the cords while pressing firmly together until they
are attached tightly.
Adjustment dials are located on the underside
of the motion sensor. Move the motion sensor
to allow for easier access to the controls. Move
sensor back into position upon completion.